Beyma 10MCF400Nd
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 270 Hz |
| Qts | 0.455 |
| Qes | 0.47 |
| Qms | 14.5 |
| Vas | 1.8 L |
| Sd | 380 cm² |
| Xmax | 0.6 mm |
| Re | 5.9 Ω |
| Bl | 28.8 T·m |
| Mms | 39.1 g |
| Pe | 400 W |
| Sensitivity | 102.1 dB |
Alignment hint
| EBP | 574 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10"MCF400Nd | 260 -10 | 0.44 -0.02 | 2 +0.2 | 3.5 +2.9 | 102 -0.1 | usable | + | |
| B&C 10NSM76 | 235 -35 | 0.52 +0.07 | 2 +0.2 | 3.5 +2.9 | 100 -2.1 | usable | + | |
| RCF MR 10N301 v2016 | 250 -20 | 0.648 +0.19 | 2.2 +0.4 | 0.7 +0.1 | 99.9 -2.2 | usable | 300 W vs 400 W: lower power handling | + |
| B&C 10NSM76 | 235 -35 | 0.66 +0.21 | 2 +0.2 | 3.5 +2.9 | 99 -3.1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| RCF MR 10N301 | 248 -22 | 0.603 +0.15 | 3.2 +1.4 | 0.9 +0.3 | 99 -3.1 | usable | 16 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling | + |
| Eminence LIL BUDDY | 149 -121 | 0.843 +0.39 | 10 +8.2 | 0.8 +0.2 | 98.5 -3.6 | risky | 50 W vs 400 W: lower power handling | + |
| Celestion G10 GREENBACK | 94.9 -175.1 | 0.471 +0.02 | 12.9 +11.1 | 0.8 +0.2 | 95.7 -6.4 | risky | 30 W vs 400 W: lower power handling | + |
| Eminence RED FANG 10 | 111 -159 | 0.481 +0.03 | 21.3 +19.5 | 0.5 -0.1 | 101 -1.1 | risky | 50 W vs 400 W: lower power handling · Xmax 0.5 mm < 0.6 mm: lower excursion-limited SPL | + |
| Jensen P10/100BB | 112.1 -157.9 | 0.804 +0.35 | 14.1 +12.3 | 1 +0.4 | 96.9 -5.2 | risky | 100 W vs 400 W: lower power handling | + |
| Celestion G10 | 129 -141 | 0.92 +0.47 | 12.3 +10.5 | 0.8 +0.2 | 94.2 -7.9 | risky | 16 Ω vs 8 Ω: amp load changes · 30 W vs 400 W: lower power handling | + |
Compare the closest 3 against the 10MCF400Nd →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.