Beyma 10MCB700

10" · 8 Ω · 700 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	75 Hz
Qts	0.33
Qes	0.35
Qms	4.9
Vas	13.2 L
Sd	350 cm²
Xmax	7 mm
Re	5.3 Ω
Bl	20.1 T·m
Mms	55 g
Pe	700 W
Sensitivity	96 dB

Alignment hint

EBP	214 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 3.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10NDL88	67 -8	0.32 -0.01	15.6 +2.4	7.8 +0.8	95.5 -0.5	close	16 Ω vs 8 Ω: amp load changes	+
18 Sound 10NTLW3500	65 -10	0.35 +0.02	16 +2.8	7.9 +0.9	95 -1	usable		+
B&C 10CLA76	71 -4	0.29 -0.04	16.4 +3.2	6.5 -0.5	96.5 +0.5	usable	400 W vs 700 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	65 -10	0.33 =	21 +7.8	7.6 +0.6	96.5 +0.5	usable	500 W vs 700 W: lower power handling	+
B&C 10NW76	68 -7	0.29 -0.04	18.5 +5.3	7 =	96.8 +0.8	usable	16 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling	+
Faital PRO 10FH530	67 -8	0.39 +0.06	20.2 +7	7.45 +0.45	96 =	usable	16 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling	+
B&C 10NW76	67 -8	0.26 -0.07	17.6 +4.4	6.8 -0.2	96.5 +0.5	usable	400 W vs 700 W: lower power handling · Xmax 6.8 mm < 7 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	66 -9	0.39 +0.06	20.9 +7.7	7.6 +0.6	96 =	usable	16 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling	+
Beyma 10MCS 500	65 -10	0.31 -0.02	24 +10.8	8 +1	96.5 +0.5	usable	500 W vs 700 W: lower power handling	+
Faital PRO 10FH520	60 -15	0.32 -0.01	22.7 +9.5	7.25 +0.25	95 -1	usable	4 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the 10MCB700 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.