Beyma 10MC700ND v2019

10" · 8 Ω · 700 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	63 Hz
Qts	0.226
Qes	0.24
Qms	3.8
Vas	20 L
Sd	350 cm²
Xmax	4.2 mm
Re	5.2 Ω
Bl	21.7 T·m
Mms	54.8 g
Pe	700 W
Sensitivity	97 dB

Alignment hint

EBP	263 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 2.3 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10MC700Nd	63 =	0.22 -0.01	20 =	7 +2.8	97 =	close		+
Monacor SP-10/500FH	60 -3	0.258 +0.03	21.6 +1.6	4.5 +0.3	96.2 -0.8	close	500 W vs 700 W: lower power handling	+
B&C 10FW64	63 =	0.23 =	27 +7	5 +0.8	98 +1	close	250 W vs 700 W: lower power handling	+
LaVoce WAN103.01	70 +7	0.22 -0.01	22.29 +2.29	5 +0.8	99 +2	close	450 W vs 700 W: lower power handling	+
Oberton 10MB300	64.7 +1.7	0.244 +0.02	22.75 +2.75	5.25 +1.05	99 +2	close	400 W vs 700 W: lower power handling	+
Oberton 10M300	59.79 -3.21	0.248 +0.02	19.43 -0.57	5.25 +1.05	100 +3	close	400 W vs 700 W: lower power handling	+
B&C 10NDL88	61 -2	0.25 +0.02	18.4 -1.6	8.1 +3.9	96 -1	close		+
Faital PRO 10FH530	60 -3	0.25 +0.02	23.5 +3.5	7.5 +3.3	97 =	close	500 W vs 700 W: lower power handling	+
B&C 10NW64	59 -4	0.26 +0.03	22 +2	6 +1.8	96 -1	close	300 W vs 700 W: lower power handling	+
Oberton 10NM300	71.36 +8.36	0.209 -0.02	20.61 +0.61	5.25 +1.05	100 +3	close	400 W vs 700 W: lower power handling	+

Compare the closest 3 against the 10MC700ND v2019 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.