Beyma 10MC700Nd

10" · 8 Ω · 700 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	63 Hz
Qts	0.22
Qes	0.24
Qms	3.8
Vas	20 L
Sd	350 cm²
Xmax	7 mm
Re	5.2 Ω
Mms	54 g
Pe	700 W
Sensitivity	97 dB

Alignment hint

EBP	263 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 2.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10NDL88	61 -2	0.25 +0.03	18.4 -1.6	8.1 +1.1	96 -1	close		+
Beyma 10MC700ND v2019	63 =	0.226 +0.01	20 =	4.2 -2.8	97 =	close	Xmax 4.2 mm < 7 mm: lower excursion-limited SPL	+
Faital PRO 10FH530	60 -3	0.25 +0.03	23.5 +3.5	7.5 +0.5	97 =	close	500 W vs 700 W: lower power handling	+
18 Sound 10NTLW2500	61 -2	0.27 +0.05	22 +2	7.6 +0.6	96.5 -0.5	close	4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling	+
B&C 10NW76	67 +4	0.19 -0.03	17.8 -2.2	6.5 -0.5	97.5 +0.5	close	4 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL	+
B&C 10NW76	67 +4	0.26 +0.04	17.6 -2.4	6.8 -0.2	96.5 -0.5	close	400 W vs 700 W: lower power handling · Xmax 6.8 mm < 7 mm: lower excursion-limited SPL	+
Faital PRO 10FH500	60 -3	0.25 +0.03	24.2 +4.2	7.25 +0.25	96 -1	close	4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling	+
Faital PRO 10HP1020	60 -3	0.24 +0.02	16.1 -3.9	9 +2	96 -1	close		+
B&C 10NW76	68 +5	0.29 +0.07	18.5 -1.5	7 =	96.8 -0.2	usable	16 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling	+
B&C 10NW64	59 -4	0.26 +0.04	22 +2	6 -1	96 -1	usable	300 W vs 700 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10MC700Nd →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.