← all drivers

Beyma 10MC500Nd

10" · 8 Ω · 500 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs58 Hz
Qts0.24
Qes0.26
Qms4.7
Vas29 L
Sd350 cm²
Xmax8 mm
Re5.5 Ω
Bl18.7 T·m
Mms45 g
Pe500 W
Sensitivity97 dB

Alignment hint

EBP223 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 3.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 10FH53060 +20.25 +0.0123.5 -5.57.5 -0.597 =closeXmax 7.5 mm < 8 mm: lower excursion-limited SPL+
Faital PRO 10FH50060 +20.26 +0.0225.8 -3.27.5 -0.596 -1closeXmax 7.5 mm < 8 mm: lower excursion-limited SPL+
Faital PRO 10FH50060 +20.25 +0.0124.2 -4.87.25 -0.7596 -1close4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 8 mm: lower excursion-limited SPL+
B&C 10NDL6456 -20.26 +0.0231 +26 -297 =close250 W vs 500 W: lower power handling · Xmax 6 mm < 8 mm: lower excursion-limited SPL+
18 Sound 10MB60058 =0.22 -0.0233.4 +4.46.5 -1.598 +1closeXmax 6.5 mm < 8 mm: lower excursion-limited SPL+
18 Sound 10MB77758 =0.22 -0.0233.4 +4.46.5 -1.598 +1closeXmax 6.5 mm < 8 mm: lower excursion-limited SPL+
18 Sound 10NTLW250061 +30.27 +0.0322 -77.6 -0.496.5 -0.5usable4 Ω vs 8 Ω: amp load changes · Xmax 7.6 mm < 8 mm: lower excursion-limited SPL+
Faital PRO 10FH52060 +20.29 +0.0523.5 -5.57.25 -0.7597 =usableXmax 7.25 mm < 8 mm: lower excursion-limited SPL+
Beyma 10MC50065 +70.29 +0.0524 -58 =97 =usable+
18 Sound 10NTLS200050 -80.26 +0.0238 +97.4 -0.697 =usable350 W vs 500 W: lower power handling · Xmax 7.4 mm < 8 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10MC500Nd →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.