Beyma 10M250

10" · 8 Ω · 250 W · 99 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	50 Hz
Qts	0.214
Qes	0.22
Qms	7.93
Vas	64 L
Sd	380 cm²
Xmax	3.5 mm
Re	5.8 Ω
Bl	16.3 T·m
Mms	32 g
Pe	250 W
Sensitivity	99 dB

Alignment hint

EBP	227 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 6.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10MI100 v2017	50 =	0.213 =	54 -10	4.5 +1	97.9 -1.1	close		+
Beyma 10"MI100	50 =	0.21 =	54 -10	4.5 +1	98 -1	close		+
Eminence KAPPALITE 3010 MB	50.7 +0.7	0.204 -0.01	52.1 -11.9	5 +1.5	99.1 +0.1	close		+
David Eden EC1060XL8	49.6 -0.4	0.207 -0.01	55.5 -8.5	2.4 -1.1	98.8 -0.2	close	150 W vs 250 W: lower power handling · Xmax 2.4 mm < 3.5 mm: lower excursion-limited SPL	+
Beyma 10G150	47 -3	0.246 +0.03	75 +11	3.7 +0.2	97 -2	usable	125 W vs 250 W: lower power handling	+
Warehouse Sound WGS 12L	49.6 -0.4	0.242 +0.03	50.5 -13.5	3.3 -0.2	97.3 -1.7	usable	Xmax 3.3 mm < 3.5 mm: lower excursion-limited SPL	+
Eminence Kappa Pro-10A	46 -4	0.2 -0.01	52.2 -11.8	3.2 -0.3	97 -2	usable	Xmax 3.2 mm < 3.5 mm: lower excursion-limited SPL	+
Eminence KAPPA PRO 10	46 -4	0.196 -0.02	52.2 -11.8	3.2 -0.3	96.9 -2.1	usable	Xmax 3.2 mm < 3.5 mm: lower excursion-limited SPL	+
Eminence KAPPA PRO 10 A	46 -4	0.196 -0.02	52.2 -11.8	3.2 -0.3	96.9 -2.1	usable	Xmax 3.2 mm < 3.5 mm: lower excursion-limited SPL	+
Faital PRO 10PR300	50 =	0.24 +0.03	49.8 -14.2	4.92 +1.42	96 -3	usable	4 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the 10M250 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.