Beyma 10LW30/N

10" · 8 Ω · 450 W · 94.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	38 Hz
Qts	0.234
Qes	0.24
Qms	9.9
Vas	56 L
Sd	350 cm²
Xmax	7 mm
Re	6.1 Ω
Bl	18.1 T·m
Mms	53.8 g
Pe	450 W
Sensitivity	94.2 dB

Alignment hint

EBP	158 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 6.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
AE Speakers TD10M-8	40.1 +2.1	0.238 =	59.2 +3.2	6 -1	94.5 +0.3	close	Xmax 6 mm < 7 mm: lower excursion-limited SPL	+
AE Speakers TD10M	40.6 +2.6	0.235 =	59.1 +3.1	6 -1	94.7 +0.5	close	Xmax 6 mm < 7 mm: lower excursion-limited SPL	+
Eminence KAPPALITE 3010LF-4	40 +2	0.251 +0.02	53.5 -2.5	8.1 +1.1	96.4 +2.2	close	4 Ω vs 8 Ω: amp load changes	+
Eminence KAPPALITE 3010 LF	38.7 +0.7	0.273 +0.04	62.4 +6.4	8.5 +1.5	93.5 -0.7	close		+
Beyma 10LW30	42 +4	0.293 +0.06	55 -1	7 =	94.6 +0.4	close		+
AE Speakers TD10X	35 -3	0.27 +0.04	67.5 +11.5	7 =	92.4 -1.8	usable		+
Eminence KAPPA PRO 10 LF	39 +1	0.281 +0.05	73 +17	7.2 +0.2	95.4 +1.2	usable		+
Beyma 10WRS300	41 +3	0.276 +0.04	66.5 +10.5	5.8 -1.2	95.1 +0.9	usable	300 W vs 450 W: lower power handling · Xmax 5.8 mm < 7 mm: lower excursion-limited SPL	+
Volt BM2500.4	32 -6	0.213 -0.02	73 +17	6.6 -0.4	93.3 -0.9	usable	200 W vs 450 W: lower power handling · Xmax 6.6 mm < 7 mm: lower excursion-limited SPL	+
Eminence Kappa Pro-10LF	39 +1	0.28 +0.05	72.97 +16.97	7.2 +0.2	91.6 -2.6	usable		+

Compare the closest 3 against the 10LW30/N →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.