Beyma 10G200
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 45 Hz |
| Qts | 0.251 |
| Qes | 0.26 |
| Qms | 7.02 |
| Vas | 56.1 L |
| Sd | 380 cm² |
| Xmax | 4.5 mm |
| Re | 6 Ω |
| Bl | 17.2 T·m |
| Mms | 45.1 g |
| Pe | 200 W |
| Sensitivity | 96.2 dB |
Alignment hint
| EBP | 173 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPALITE 3010LF-4 | 40 -5 | 0.251 = | 53.5 -2.6 | 8.1 +3.6 | 96.4 +0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MW/ND | 47 +2 | 0.26 +0.01 | 48 -8.1 | 5.9 +1.4 | 96.3 +0.1 | close | + | |
| Faital PRO 10PR300 | 50 +5 | 0.24 -0.01 | 49.8 -6.3 | 4.92 +0.42 | 96 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| AE Speakers TD10M | 40.6 -4.4 | 0.235 -0.02 | 59.1 +3 | 6 +1.5 | 94.7 -1.5 | close | + | |
| AE Speakers TD10M-8 | 40.1 -4.9 | 0.238 -0.01 | 59.2 +3.1 | 6 +1.5 | 94.5 -1.7 | close | + | |
| Beyma 10WR300 | 47 +2 | 0.287 +0.04 | 50.5 -5.6 | 5.8 +1.3 | 95.5 -0.7 | close | + | |
| SICA 10 S 3 CP 4 Ohms | 44 -1 | 0.281 +0.03 | 51.3 -4.8 | 7 +2.5 | 97.7 +1.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10PR320 | 48 +3 | 0.29 +0.04 | 52.7 -3.4 | 7.37 +2.87 | 96 -0.2 | close | + | |
| Eminence KAPPALITE 3010LF-4 vp | 43.1 -1.9 | 0.281 +0.03 | 49.3 -6.8 | 8.4 +3.9 | 96.5 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NW650 | 51 +6 | 0.27 +0.02 | 50 -6.1 | 7 +2.5 | 95.5 -0.7 | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 10G200 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.