Beyma 10G150
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.246 |
| Qes | 0.29 |
| Qms | 1.63 |
| Vas | 75 L |
| Sd | 380 cm² |
| Xmax | 3.7 mm |
| Re | 6.8 Ω |
| Bl | 14.6 T·m |
| Mms | 30.9 g |
| Pe | 125 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 162 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 10.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10G200 | 45 -2 | 0.251 +0.01 | 56.1 -18.9 | 4.5 +0.8 | 96.2 -0.8 | close | + | |
| Warehouse Sound WGS 12L | 49.6 +2.6 | 0.242 = | 50.5 -24.5 | 3.3 -0.4 | 97.3 +0.3 | usable | Xmax 3.3 mm < 3.7 mm: lower excursion-limited SPL | + |
| Eminence S2010 | 46 -1 | 0.314 +0.07 | 63.4 -11.6 | 4 +0.3 | 96.6 -0.4 | usable | + | |
| Beyma 10M250 | 50 +3 | 0.214 -0.03 | 64 -11 | 3.5 -0.2 | 99 +2 | usable | Xmax 3.5 mm < 3.7 mm: lower excursion-limited SPL | + |
| Eminence BASSLITE S2010 | 46 -1 | 0.31 +0.06 | 63.4 -11.6 | 4 +0.3 | 96.2 -0.8 | usable | + | |
| SICA 10 C 2 CP v2017 | 50 +3 | 0.308 +0.06 | 63.2 -11.8 | 4.5 +0.8 | 96.9 -0.1 | usable | + | |
| Faital PRO 10PR300 | 50 +3 | 0.24 -0.01 | 49.8 -25.2 | 4.92 +1.22 | 96 -1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MW/ND | 47 = | 0.26 +0.01 | 48 -27 | 5.9 +2.2 | 96.3 -0.7 | usable | + | |
| Beyma 10WRS300 | 41 -6 | 0.276 +0.03 | 66.5 -8.5 | 5.8 +2.1 | 95.1 -1.9 | usable | + | |
| Ciare CW250C | 39 -8 | 0.27 +0.02 | 77 +2 | 5 +1.3 | 93.3 -3.7 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 10G150 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.