Beyma 10G100
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 56 Hz |
| Qts | 0.21 |
| Qes | 0.234 |
| Qms | 2.07 |
| Vas | 65 L |
| Sd | 370 cm² |
| Xmax | 1.5 mm |
| Re | 6 Ω |
| Bl | 14.7 T·m |
| Mms | 23.8 g |
| Pe | 80 W |
| Sensitivity | 100.1 dB |
Alignment hint
| EBP | 239 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10M250 | 50 -6 | 0.214 = | 64 -1 | 3.5 +2 | 99 -1.1 | close | + | |
| Eminence DELTA PRO 10MR-8 | 53 -3 | 0.232 +0.02 | 61.4 -3.6 | 1.3 -0.2 | 98.7 -1.4 | close | Xmax 1.3 mm < 1.5 mm: lower excursion-limited SPL | + |
| David Eden EC1060XL8 | 49.6 -6.4 | 0.207 = | 55.5 -9.5 | 2.4 +0.9 | 98.8 -1.3 | close | + | |
| Ciare CH252 | 55 -1 | 0.246 +0.04 | 52 -13 | 1.4 -0.1 | 101 +0.9 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 1.4 mm < 1.5 mm: lower excursion-limited SPL | + |
| Beyma 10"MI100 | 50 -6 | 0.21 = | 54 -11 | 4.5 +3 | 98 -2.1 | usable | + | |
| Eminence KAPPALITE 3010 MB | 50.7 -5.3 | 0.204 -0.01 | 52.1 -12.9 | 5 +3.5 | 99.1 -1 | usable | + | |
| Beyma 10MI100 v2017 | 50 -6 | 0.213 = | 54 -11 | 4.5 +3 | 97.9 -2.2 | usable | + | |
| Eminence Kappa Pro-10A | 46 -10 | 0.2 -0.01 | 52.2 -12.8 | 3.2 +1.7 | 97 -3.1 | usable | + | |
| 18 Sound 10NMBA520 | 60 +4 | 0.23 +0.02 | 42 -23 | 4 +2.5 | 100.5 +0.4 | usable | + | |
| Volt BM251.4 PA | 59 +3 | 0.274 +0.06 | 49 -16 | 2.5 +1 | 99.3 -0.8 | usable | + |
Compare the closest 3 against the 10G100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.