← all drivers

Beyma 10BR60 V2 vp JF rouge

10" · 8 Ω · 100 W · 90.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs30.7 Hz
Qts0.435
Qes0.504
Qms3.167
Vas113.7 L
Sd359.7 cm²
Xmax6.5 mm
Re7.85 Ω
Bl11.4 T·m
Mms42.9 g
Pe100 W
Sensitivity90.2 dB

Alignment hint

EBP61 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 69.2 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10BR60 V231 +0.30.471 +0.04108.2 -5.56.5 =90.6 +0.4close+
Beyma 10BR60 V2 vp JF bleu32 +1.30.459 +0.0299.9 -13.86.5 =90 -0.2close+
Dayton Audio DA270-8 1027.8 -2.90.429 -0.01108.5 -5.26.1 -0.489.3 -0.9closeXmax 6.1 mm < 6.5 mm: lower excursion-limited SPL+
Dayton Audio SD270-8829.6 -1.10.44 +0.01112.2 -1.56 -0.593.7 +3.5close4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL+
Dayton Audio DA270-827.8 -2.90.43 -0.01108.5 -5.26.1 -0.488.1 -2.1closeXmax 6.1 mm < 6.5 mm: lower excursion-limited SPL+
SB Acoustics SB26SFCL38-427.4 -3.30.434 =104 -9.77.2 +0.792.4 +2.2close4 Ω vs 8 Ω: amp load changes+
JBL LE10A30 -0.70.41 -0.03101.9 -11.86.1 -0.492.5 +2.3close60 W vs 100 W: lower power handling · Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL+
Focal 11C 72630.9 +0.20.378 -0.06120 +6.36.9 +0.492.4 +2.2close+
Dayton Audio DC250-828.9 -1.80.445 +0.01111.4 -2.34.5 -290.1 -0.1close70 W vs 100 W: lower power handling · Xmax 4.5 mm < 6.5 mm: lower excursion-limited SPL+
Dayton Audio SD270A-88 DVC26.2 -4.50.433 =107.5 -6.26 -0.591.9 +1.7close4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10BR60 V2 vp JF rouge →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.