Beyma 10BR60 V2 vp JF bleu

10" · 8 Ω · 100 W · 90 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	32 Hz
Qts	0.459
Qes	0.534
Qms	3.248
Vas	99.9 L
Sd	359.7 cm²
Xmax	6.5 mm
Re	7.79 Ω
Bl	11.5 T·m
Mms	44.8 g
Pe	100 W
Sensitivity	90 dB

Alignment hint

EBP	60 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 72.7 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10BR60 V2	31 -1	0.471 +0.01	108.2 +8.3	6.5 =	90.6 +0.6	close		+
Beyma 10BR60 V2 vp JF rouge	30.7 -1.3	0.435 -0.02	113.7 +13.8	6.5 =	90.2 +0.2	close		+
Dayton Audio RS270-8 v2017	29.6 -2.4	0.472 +0.01	96.5 -3.4	6 -0.5	88.8 -1.2	close	Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
SICA 10 SR 2 PL	32.6 +0.6	0.481 +0.02	82.3 -17.6	6.5 =	90.6 +0.6	close		+
SICA Z005780	31.7 -0.3	0.455 =	92.6 -7.3	8.9 +2.4	93.5 +3.5	close	4 Ω vs 8 Ω: amp load changes	+
Dayton Audio DS270-8 v2018	31.6 -0.4	0.441 -0.02	87.7 -12.2	5.5 -1	90.8 +0.8	close	Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL	+
Dayton Audio DS270-8	30.7 -1.3	0.444 -0.02	84.7 -15.2	5.5 -1	90.2 +0.2	close	Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL	+
SEAS W26FX002	31 -1	0.397 -0.06	87 -12.9	6.5 =	90.5 +0.5	close		+
Dayton Audio DA270-8 10	27.8 -4.2	0.429 -0.03	108.5 +8.6	6.1 -0.4	89.3 -0.7	close	Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL	+
JBL LE10A	30 -2	0.41 -0.05	101.9 +2	6.1 -0.4	92.5 +2.5	close	60 W vs 100 W: lower power handling · Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10BR60 V2 vp JF bleu →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.