Beyma 10BR60 V2

10" · 8 Ω · 100 W · 90.6 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	31 Hz
Qts	0.471
Qes	0.55
Qms	3.29
Vas	108.2 L
Sd	380 cm²
Xmax	6.5 mm
Re	6.5 Ω
Bl	10.7 T·m
Mms	49.3 g
Pe	100 W
Sensitivity	90.6 dB

Alignment hint

EBP	56 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 86.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10BR60 V2 vp JF bleu	32 +1	0.459 -0.01	99.9 -8.3	6.5 =	90 -0.6	close		+
Beyma 10BR60 V2 vp JF rouge	30.7 -0.3	0.435 -0.04	113.7 +5.5	6.5 =	90.2 -0.4	close		+
Dayton Audio RS270-8 v2017	29.6 -1.4	0.472 =	96.5 -11.7	6 -0.5	88.8 -1.8	close	Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
SICA 10 SR 2 PL	32.6 +1.6	0.481 +0.01	82.3 -25.9	6.5 =	90.6 =	close		+
Monacor SP-254TC	30 -1	0.505 +0.03	109 +0.8	5 -1.5	90 -0.6	close	75 W vs 100 W: lower power handling · Xmax 5 mm < 6.5 mm: lower excursion-limited SPL	+
Dayton Audio DA270-8 10	27.8 -3.2	0.429 -0.04	108.5 +0.3	6.1 -0.4	89.3 -1.3	close	Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL	+
Dayton Audio SD270-88	29.6 -1.4	0.44 -0.03	112.2 +4	6 -0.5	93.7 +3.1	close	4 Ω vs 8 Ω: amp load changes · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL	+
SB Acoustics SB26SFCL38-4	27.4 -3.6	0.434 -0.04	104 -4.2	7.2 +0.7	92.4 +1.8	close	4 Ω vs 8 Ω: amp load changes	+
SICA Z005780	31.7 +0.7	0.455 -0.02	92.6 -15.6	8.9 +2.4	93.5 +2.9	close	4 Ω vs 8 Ω: amp load changes	+
JBL LE10A	30 -1	0.41 -0.06	101.9 -6.3	6.1 -0.4	92.5 +1.9	close	60 W vs 100 W: lower power handling · Xmax 6.1 mm < 6.5 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10BR60 V2 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.