Beyma 10BR60 STUDIO

10" · 8 Ω · 100 W · 90.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	42 Hz
Qts	0.467
Qes	0.62
Qms	1.9
Vas	47 L
Sd	380 cm²
Xmax	3.6 mm
Re	6.5 Ω
Bl	13.1 T·m
Mms	61.8 g
Pe	100 W
Sensitivity	90.4 dB

Alignment hint

EBP	68 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 36.4 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10BR60	45 +3	0.467 =	47 =	3.5 -0.1	91.3 +0.9	close	Xmax 3.5 mm < 3.6 mm: lower excursion-limited SPL	+
Focal 10W 6411	43.7 +1.7	0.451 -0.02	42.3 -4.7	4.2 +0.6	92.6 +2.2	close		+
Kartesian WOM250_VPA	45 +3	0.485 +0.02	37.7 -9.3	4.5 +0.9	90.3 -0.1	close		+
Oberton 10B100	44 +2	0.447 -0.02	40.5 -6.5	4.4 +0.8	92.5 +2.1	close		+
Skytronic SPC 254	38.5 -3.5	0.414 -0.05	49 +2	4.1 +0.5	88.3 -2.1	close		+
Aurum Cantus AC250SW	35 -7	0.452 -0.02	42 -5	5.9 +2.3	90.5 +0.1	close	4 Ω vs 8 Ω: amp load changes	+
Aurum Cantus AC250SW vp	35 -7	0.452 -0.02	42 -5	5.9 +2.3	90.5 +0.1	close	4 Ω vs 8 Ω: amp load changes	+
MCM Electronics 55-2981	41.8 -0.2	0.54 +0.07	58.1 +11.1	3.9 +0.3	91.1 +0.7	close	70 W vs 100 W: lower power handling	+
Kenwood KFC-W2502	39.8 -2.2	0.514 +0.05	44.9 -2.1	8.4 +4.8	89 -1.4	close	4 Ω vs 8 Ω: amp load changes	+
Monacor SP-252E	42 =	0.503 +0.04	57 +10	4 +0.4	93.7 +3.3	close	4 Ω vs 8 Ω: amp load changes · 75 W vs 100 W: lower power handling	+

Compare the closest 3 against the 10BR60 STUDIO →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.