← all drivers

Beyma 10BR60

10" · 8 Ω · 100 W · 91.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs45 Hz
Qts0.467
Qes0.62
Qms1.9
Vas47 L
Sd380 cm²
Xmax3.5 mm
Re6.5 Ω
Bl12.6 T·m
Mms53.9 g
Pe100 W
Sensitivity91.3 dB

Alignment hint

EBP73 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 36.4 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10BR60 STUDIO42 -30.467 =47 =3.6 +0.190.4 -0.9close+
Focal 10W 641143.7 -1.30.451 -0.0242.3 -4.74.2 +0.792.6 +1.3close+
Oberton 10B10044 -10.447 -0.0240.5 -6.54.4 +0.992.5 +1.2close+
Kartesian WOM250_VPA45 =0.485 +0.0237.7 -9.34.5 +190.3 -1close+
Eminence BASSLITE CA201051 +60.505 +0.0449 +23.5 =94.6 +3.3close+
MCM Electronics 55-298141.8 -3.20.54 +0.0758.1 +11.13.9 +0.491.1 -0.2usable70 W vs 100 W: lower power handling+
Monacor SP-252E42 -30.503 +0.0457 +104 +0.593.7 +2.4usable4 Ω vs 8 Ω: amp load changes · 75 W vs 100 W: lower power handling+
Conrad PA 1050.7 +5.70.546 +0.0841.5 -5.53.9 +0.491.8 +0.5usable+
Conrad PA 10 v201650.7 +5.70.546 +0.0841.5 -5.54 +0.591.8 +0.5usable+
Dayton Audio PA255-846.4 +1.40.484 +0.0259 +125 +1.594.6 +3.3usable+

Compare the closest 3 against the 10BR60 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.