Beyma 10B60
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 31 Hz |
| Qts | 0.36 |
| Qes | 0.47 |
| Qms | 1.53 |
| Vas | 115 L |
| Sd | 380 cm² |
| Xmax | 4 mm |
| Re | 6 Ω |
| Bl | 10.7 T·m |
| Mms | 46.4 g |
| Pe | 80 W |
| Sensitivity | 91.9 dB |
Alignment hint
| EBP | 66 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 40.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10B-60 | 31 = | 0.35 -0.01 | 115 = | 4 = | 90.6 -1.3 | close | 40 W vs 80 W: lower power handling | + |
| JBL 127H-1 | 31 = | 0.357 = | 112 -3 | 5 +1 | 92.7 +0.8 | close | 50 W vs 80 W: lower power handling | + |
| Focal 10N511 | 29.6 -1.4 | 0.371 +0.01 | 121 +6 | 6 +2 | 92.2 +0.3 | close | 60 W vs 80 W: lower power handling | + |
| Focal 11C 726 | 30.9 -0.1 | 0.378 +0.02 | 120 +5 | 6.9 +2.9 | 92.4 +0.5 | close | + | |
| Ciare HW251 | 29 -2 | 0.33 -0.03 | 111 -4 | 4 = | 90.6 -1.3 | close | + | |
| Volt B250 | 31.7 +0.7 | 0.377 +0.02 | 104 -11 | 6 +2 | 92.8 +0.9 | close | + | |
| Visaton W250S-8 | 31 = | 0.323 -0.04 | 121 +6 | 6.5 +2.5 | 92.5 +0.6 | close | + | |
| Visaton W250S v2 | 31 = | 0.323 -0.04 | 121 +6 | 6.5 +2.5 | 92.5 +0.6 | close | + | |
| Visaton W250S8 | 31 = | 0.323 -0.04 | 121 +6 | 6.5 +2.5 | 92.5 +0.6 | close | + | |
| Visaton W250S8 v2 | 31 = | 0.323 -0.04 | 121 +6 | 6.5 +2.5 | 92.5 +0.6 | close | + |
Compare the closest 3 against the 10B60 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.