Beyma 10"WRS 300

10" · 8 Ω · 300 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	52 Hz
Qts	0.38
Qes	0.4
Qms	5.5
Vas	42 L
Sd	350 cm²
Xmax	6 mm
Re	6.1 Ω
Bl	13.9 T·m
Mms	39 g
Pe	300 W
Sensitivity	95 dB

Alignment hint

EBP	130 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 17.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
LaVoce NBASS10-20	52 =	0.39 +0.01	43.38 +1.38	6.6 +0.6	95.5 +0.5	close	150 W vs 300 W: lower power handling	+
Beyma 10"WR300	52 =	0.35 -0.03	42 =	6 =	95 =	close		+
Beyma 10CM/V2	52 =	0.42 +0.04	44 +2	6.5 +0.5	95 =	close		+
18 Sound 10NW750	52 =	0.36 -0.02	38 -4	7.1 +1.1	94 -1	close	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10PR320	50 -2	0.38 =	50.6 +8.6	7.27 +1.27	95 =	close	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10PR320 16 Ohms	50 -2	0.38 =	44.1 +2.1	6.6 +0.6	91.6 -3.4	close	16 Ω vs 8 Ω: amp load changes	+
Beyma 10CMV2	52 =	0.418 +0.04	44 +2	5.2 -0.8	94.5 -0.5	close	Xmax 5.2 mm < 6 mm: lower excursion-limited SPL	+
Ciare FXE 10-2.5	46 -6	0.358 -0.02	41.6 -0.4	6 =	93.6 -1.4	close		+
Faital PRO 10FE300	50 -2	0.39 +0.01	49 +7	5.47 -0.53	94 -1	close	4 Ω vs 8 Ω: amp load changes · Xmax 5.47 mm < 6 mm: lower excursion-limited SPL	+
Beyma 10MW/ND v2	49 -3	0.319 -0.06	40.7 -1.3	6.1 +0.1	94.8 -0.2	close		+

Compare the closest 3 against the 10"WRS 300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.