Beyma 10"MI100

10" · 8 Ω · 350 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	50 Hz
Qts	0.21
Qes	0.22
Qms	6.6
Vas	54 L
Sd	380 cm²
Xmax	4.5 mm
Re	6.3 Ω
Bl	18.7 T·m
Mms	38 g
Pe	350 W
Sensitivity	98 dB

Alignment hint

EBP	227 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10MI100 v2017	50 =	0.213 =	54 =	4.5 =	97.9 -0.1	close		+
Eminence KAPPALITE 3010 MB	50.7 +0.7	0.204 -0.01	52.1 -1.9	5 +0.5	99.1 +1.1	close		+
Faital PRO 10PR300	50 =	0.24 +0.03	49.8 -4.2	4.92 +0.42	96 -2	close	4 Ω vs 8 Ω: amp load changes	+
Beyma 10M250	50 =	0.214 =	64 +10	3.5 -1	99 +1	close	250 W vs 350 W: lower power handling · Xmax 3.5 mm < 4.5 mm: lower excursion-limited SPL	+
Dayton Audio APOLLO 10N	54 +4	0.222 +0.01	43.5 -10.5	4.3 -0.2	97.1 -0.9	close	250 W vs 350 W: lower power handling · Xmax 4.3 mm < 4.5 mm: lower excursion-limited SPL	+
Eminence Kappa Pro-10A	46 -4	0.2 -0.01	52.2 -1.8	3.2 -1.3	97 -1	usable	Xmax 3.2 mm < 4.5 mm: lower excursion-limited SPL	+
Beyma 10G200	45 -5	0.251 +0.04	56.1 +2.1	4.5 =	96.2 -1.8	usable	200 W vs 350 W: lower power handling	+
Eminence KAPPA PRO 10	46 -4	0.196 -0.01	52.2 -1.8	3.2 -1.3	96.9 -1.1	usable	Xmax 3.2 mm < 4.5 mm: lower excursion-limited SPL	+
Eminence KAPPA PRO 10 A	46 -4	0.196 -0.01	52.2 -1.8	3.2 -1.3	96.9 -1.1	usable	Xmax 3.2 mm < 4.5 mm: lower excursion-limited SPL	+
Warehouse Sound WGS 12L	49.6 -0.4	0.242 +0.03	50.5 -3.5	3.3 -1.2	97.3 -0.7	usable	200 W vs 350 W: lower power handling · Xmax 3.3 mm < 4.5 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10"MI100 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.