Beyma 10"BR60 V2
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 29 Hz |
| Qts | 0.39 |
| Qes | 0.44 |
| Qms | 3.3 |
| Vas | 142 L |
| Sd | 380 cm² |
| Xmax | 6.5 mm |
| Re | 6.5 Ω |
| Bl | 10.9 T·m |
| Mms | 44 g |
| Pe | 100 W |
| Sensitivity | 92 dB |
Alignment hint
| EBP | 66 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 62.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10BR60 V2 v2023 | 29 = | 0.388 = | 142 = | 6.5 = | 91.8 -0.2 | close | + | |
| Visaton W250S | 31 +2 | 0.401 +0.01 | 140 -2 | 7 +0.5 | 92.2 +0.2 | close | + | |
| Focal 11C 726 | 30.9 +1.9 | 0.378 -0.01 | 120 -22 | 6.9 +0.4 | 92.4 +0.4 | close | + | |
| SEAS CA26RFX | 29 = | 0.337 -0.05 | 129 -13 | 7 +0.5 | 92 = | close | + | |
| Focal 10N511 | 29.6 +0.6 | 0.371 -0.02 | 121 -21 | 6 -0.5 | 92.2 +0.2 | close | 60 W vs 100 W: lower power handling · Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Dayton Audio RS270S-8 | 26.9 -2.1 | 0.41 +0.02 | 147.2 +5.2 | 6 -0.5 | 90 -2 | close | Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| Focal 10K 516 | 27.8 -1.2 | 0.348 -0.04 | 157 +15 | 7.5 +1 | 93.3 +1.3 | close | + | |
| Scan-Speak 26W/8534G00 | 25 -4 | 0.368 -0.02 | 153 +11 | 6 -0.5 | 91.5 -0.5 | close | Xmax 6 mm < 6.5 mm: lower excursion-limited SPL | + |
| SEAS CA26RE4X vp1 | 27.3 -1.7 | 0.317 -0.07 | 143 +1 | 7.1 +0.6 | 92.5 +0.5 | close | + | |
| Scan-Speak 25W/8561 | 28 -1 | 0.306 -0.08 | 140 -2 | 6.5 = | 93 +1 | close | + |
Compare the closest 3 against the 10"BR60 V2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.