← all drivers

B&C DH450

1" exit · 16 Ω · 20 W · 110 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil44 mm
Impedance16 Ω
Usable range1000-18000 Hz
Min crossover1000 Hz
Sensitivity (on horn)110 dB
Weight0.53 kg
Power (AES)20 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
B&C DH450H1000 =1000 =18000 =44 =110 =close+
Faital PRO HF10061000 =1000 =20000 +200044 =110 =close8 Ω vs 16 Ω: amp load changes+
B&C DH4501000 =1000 =18000 =44 =109 -1close8 Ω vs 16 Ω: amp load changes+
B&C DH450H1000 =1000 =18000 =44 =109 -1close8 Ω vs 16 Ω: amp load changes+
RCF ND1710-MT31000 =1000 =20000 +200044 =109 -1close8 Ω vs 16 Ω: amp load changes+
B&C DH3501000 =1000 =17000 -100036 -8109.5 -0.5close15 W vs 20 W: lower power handling+
B&C DH350H1000 =1000 =17000 -100036 -8109.5 -0.5close+
B&C DH3501000 =1000 =17000 -100036 -8108 -2close4 Ω vs 16 Ω: amp load changes · 15 W vs 20 W: lower power handling+
B&C DH3501000 =1000 =17000 -100036 -8108 -2close8 Ω vs 16 Ω: amp load changes · 15 W vs 20 W: lower power handling+
B&C DH350H1000 =1000 =17000 -100036 -8108 -2close4 Ω vs 16 Ω: amp load changes+

Compare the closest 3 against the DH450 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.