← all drivers

B&C DE502

1" exit · 16 Ω · 50 W · 108 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil44 mm
Impedance16 Ω
Usable range1000-18000 Hz
Min crossover1500 Hz
Sensitivity (on horn)108 dB
Weight1.4 kg
Power (AES)50 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
B&C DE5021500 =1000 =18000 =44 =107 -1close8 Ω vs 16 Ω: amp load changes+
Faital PRO HF1091300 -2001000 =20000 +200044 =108 =close+
Faital PRO HF1091300 -2001000 =20000 +200044 =108 =close8 Ω vs 16 Ω: amp load changes+
B&C DE4001600 +1001000 =18000 =44 =108.5 +0.5close8 Ω vs 16 Ω: amp load changes · min crossover 1600 Hz > 1500 Hz: raise the XO+
B&C DE250TN1500 =1000 =18000 =44 =106 -2close8 Ω vs 16 Ω: amp load changes+
B&C DE4001600 +1001000 =18000 =44 =109 +1closemin crossover 1600 Hz > 1500 Hz: raise the XO+
Faital PRO HF1031300 -2001000 =20000 +200044 =107 -1close+
Faital PRO HF1031300 -2001000 =20000 +200044 =107 -1close8 Ω vs 16 Ω: amp load changes+
Faital PRO HF1081300 -2001000 =20000 +200044 =109 +1close+
Faital PRO HF1081300 -2001000 =20000 +200044 =109 +1close8 Ω vs 16 Ω: amp load changes+

Compare the closest 3 against the DE502 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.