← all drivers

B&C DE400

1" exit · 16 Ω · 50 W · 109 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil44 mm
Impedance16 Ω
Usable range1000-18000 Hz
Min crossover1600 Hz
Sensitivity (on horn)109 dB
Weight0.86 kg
Power (AES)50 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
B&C DE4001600 =1000 =18000 =44 =108.5 -0.5close8 Ω vs 16 Ω: amp load changes+
B&C DE5021500 -1001000 =18000 =44 =108 -1close+
Faital PRO HF1081300 -3001000 =20000 +200044 =109 =close+
Faital PRO HF1081300 -3001000 =20000 +200044 =109 =close8 Ω vs 16 Ω: amp load changes+
Faital PRO HF108R1300 -3001000 =20000 +200044 =109 =close+
Faital PRO HF108R1300 -3001000 =20000 +200044 =109 =close8 Ω vs 16 Ω: amp load changes+
Celestion CDX1-17471600 =1000 =20000 +200044 =110 +1close8 Ω vs 16 Ω: amp load changes+
Celestion CDX1-17481600 =1000 =20000 +200044 =110 +1close8 Ω vs 16 Ω: amp load changes+
B&C DH4501000 -6001000 =18000 =44 =109 =close8 Ω vs 16 Ω: amp load changes · 20 W vs 50 W: lower power handling+
B&C DH450H1000 -6001000 =18000 =44 =109 =close8 Ω vs 16 Ω: amp load changes+

Compare the closest 3 against the DE400 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.