← all drivers

B&C DE111

1" exit · 16 Ω · 25 W · 108.5 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil36 mm
Impedance16 Ω
Usable range1000-17000 Hz
Min crossover1200 Hz
Sensitivity (on horn)108.5 dB
Weight0.32 kg
Power (AES)25 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
B&C DH3501000 -2001000 =17000 =36 =108 -0.5close4 Ω vs 16 Ω: amp load changes · 15 W vs 25 W: lower power handling+
B&C DH3501000 -2001000 =17000 =36 =108 -0.5close8 Ω vs 16 Ω: amp load changes · 15 W vs 25 W: lower power handling+
B&C DH350H1000 -2001000 =17000 =36 =108 -0.5close4 Ω vs 16 Ω: amp load changes+
B&C DH350H1000 -2001000 =17000 =36 =108 -0.5close8 Ω vs 16 Ω: amp load changes+
B&C DE1111200 =1000 =17000 =36 =107 -1.5close8 Ω vs 16 Ω: amp load changes+
B&C DH3501000 -2001000 =17000 =36 =109.5 +1close15 W vs 25 W: lower power handling+
B&C DH350H1000 -2001000 =17000 =36 =109.5 +1close+
LaVoce DN10.1421200 =1000 =18000 +100036 =107 -1.5close+
LaVoce DN10.1421200 =1000 =18000 +100036 =107 -1.5close8 Ω vs 16 Ω: amp load changes+
B&C DH4501000 -2001000 =18000 +100044 +8109 +0.5close8 Ω vs 16 Ω: amp load changes+

Compare the closest 3 against the DE111 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.