← all drivers

B&C DE10

1" exit · 8 Ω · 20 W · 107 dB · datasheet ↗

Compression driver specs

Throat exit1"
Voice coil25 mm
Impedance8 Ω
Usable range1500-18000 Hz
Min crossover2500 Hz
Sensitivity (on horn)107 dB
Weight0.8 kg
Power (AES)20 W

Compatible horns (same exit)

Matched on throat exit (1") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
LaVoce DF10.101L2500 =1500 =18000 =25.4 +0.4107 =close16 Ω vs 8 Ω: amp load changes+
LaVoce DF10.101L2500 =1500 =18000 =25.4 +0.4107 =close+
LaVoce DF10.101LM2500 =1500 =18000 =25.4 +0.4107 =close15 W vs 20 W: lower power handling+
LaVoce DF10.101LS2500 =1500 =18000 =25.4 +0.4107 =close+
Celestion CDX1-10102200 -3001500 =20000 +200025 =107 =close15 W vs 20 W: lower power handling+
Celestion CDX1-10702200 -3001500 =20000 +200025 =106 -1close12 W vs 20 W: lower power handling+
Faital PRO HF1002000 -5001500 =20000 +200025 =108 +1close+
LaVoce DF10.101LE2000 -5001500 =20000 +200025.4 +0.4106 -1close16 Ω vs 8 Ω: amp load changes · 15 W vs 20 W: lower power handling+
LaVoce DF10.101LE2000 -5001500 =20000 +200025.4 +0.4106 -1close15 W vs 20 W: lower power handling+
Faital PRO HF1022600 +1001800 +30020000 +200025 =107 =closemin crossover 2600 Hz > 2500 Hz: raise the XO+

Compare the closest 3 against the DE10 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.