B&C 8NDL64
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 80 Hz |
| Qts | 0.25 |
| Qes | 0.25 |
| Qms | 10.91 |
| Vas | 9.6 L |
| Sd | 220 cm² |
| Xmax | 4.5 mm |
| Re | 5.4 Ω |
| Bl | 17.5 T·m |
| Mms | 28 g |
| Pe | 350 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 320 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 8NW51 | 76 -4 | 0.25 = | 10.6 +1 | 6 +1.5 | 97 = | close | 4 Ω vs 8 Ω: amp load changes · 200 W vs 350 W: lower power handling | + |
| Oberton 8NMB250v4 | 82.03 +2.03 | 0.258 +0.01 | 10.89 +1.29 | 4.5 = | 96 -1 | close | 250 W vs 350 W: lower power handling | + |
| LaVoce WAN082.02 | 80 = | 0.23 -0.02 | 8.97 -0.63 | 5.8 +1.3 | 96.5 -0.5 | close | 200 W vs 350 W: lower power handling | + |
| 18 Sound 8NTLW2000 | 74 -6 | 0.26 +0.01 | 11.3 +1.7 | 4.4 -0.1 | 96.5 -0.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 4.4 mm < 4.5 mm: lower excursion-limited SPL | + |
| B&C 8NDL64 | 73 -7 | 0.24 -0.01 | 11.8 +2.2 | 4.5 = | 97 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| LaVoce WAF082.01 | 76 -4 | 0.21 -0.04 | 10.21 +0.61 | 5.8 +1.3 | 97 = | close | 250 W vs 350 W: lower power handling | + |
| B&C 8CLA64 | 71 -9 | 0.24 -0.01 | 12.5 +2.9 | 5.3 +0.8 | 96 -1 | usable | 250 W vs 350 W: lower power handling | + |
| Sica 8 K 3 PL | 68.1 -11.9 | 0.25 = | 12.2 +2.6 | 5 +0.5 | 95.1 -1.9 | usable | + | |
| Oberton 8NB201 | 70.56 -9.44 | 0.245 -0.01 | 12.54 +2.94 | 5.25 +0.75 | 95 -2 | usable | 200 W vs 350 W: lower power handling | + |
| LaVoce WAN082.01 | 85 +5 | 0.32 +0.07 | 9 -0.6 | 5.8 +1.3 | 96 -1 | usable | 200 W vs 350 W: lower power handling | + |
Compare the closest 3 against the 8NDL64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.