B&C 8CLA64
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 71 Hz |
| Qts | 0.24 |
| Qes | 0.25 |
| Qms | 7.3 |
| Vas | 12.5 L |
| Sd | 220 cm² |
| Xmax | 5.3 mm |
| Re | 5.6 Ω |
| Bl | 16.4 T·m |
| Mms | 27 g |
| Pe | 250 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 284 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 8NB201 | 70.56 -0.44 | 0.245 +0.01 | 12.54 +0.04 | 5.25 -0.05 | 95 -1 | close | Xmax 5.25 mm < 5.3 mm: lower excursion-limited SPL | + |
| Sica 8 K 3 PL | 68.1 -2.9 | 0.25 +0.01 | 12.2 -0.3 | 5 -0.3 | 95.1 -0.9 | close | Xmax 5 mm < 5.3 mm: lower excursion-limited SPL | + |
| B&C 8NDL64 | 73 +2 | 0.24 = | 11.8 -0.7 | 4.5 -0.8 | 97 +1 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 4.5 mm < 5.3 mm: lower excursion-limited SPL | + |
| B&C 8FW51 | 74 +3 | 0.21 -0.03 | 12 -0.5 | 6 +0.7 | 97 +1 | close | + | |
| B&C 8NW51 | 76 +5 | 0.25 +0.01 | 10.6 -1.9 | 6 +0.7 | 97 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 8NW51 | 68 -3 | 0.22 -0.02 | 14 +1.5 | 7 +1.7 | 97 +1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 8NTLW2000 | 74 +3 | 0.26 +0.02 | 11.3 -1.2 | 4.4 -0.9 | 96.5 +0.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 4.4 mm < 5.3 mm: lower excursion-limited SPL | + |
| 18 Sound 8NTLW2000 | 71 = | 0.21 -0.03 | 13 +0.5 | 4.4 -0.9 | 97.5 +1.5 | close | Xmax 4.4 mm < 5.3 mm: lower excursion-limited SPL | + |
| Oberton 8NMB250v4 | 82.03 +11.03 | 0.258 +0.02 | 10.89 -1.61 | 4.5 -0.8 | 96 = | usable | Xmax 4.5 mm < 5.3 mm: lower excursion-limited SPL | + |
| Beyma 8WR300 | 65 -6 | 0.27 +0.03 | 15 +2.5 | 6 +0.7 | 95 -1 | usable | + |
Compare the closest 3 against the 8CLA64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.