B&C 8CL51
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 8 Ω |
| Fs | 69 Hz |
| Qts | 0.41 |
| Qes | 0.44 |
| Qms | 5.6 |
| Vas | 12.5 L |
| Sd | 220 cm² |
| Xmax | 6.5 mm |
| Re | 5.1 Ω |
| Bl | 12 T·m |
| Mms | 29 g |
| Pe | 200 W |
| Sensitivity | 94 dB |
Alignment hint
| EBP | 157 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 8PR320 | 65 -4 | 0.41 = | 13.1 +0.6 | 7.33 +0.83 | 95 +1 | close | + | |
| B&C 8NDL51 | 70 +1 | 0.47 +0.06 | 13.4 +0.9 | 7 +0.5 | 94 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 8FE300 | 70 +1 | 0.41 = | 14 +1.5 | 5.47 -1.03 | 93 -1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 5.47 mm < 6.5 mm: lower excursion-limited SPL | + |
| B&C 8NDL51 | 66 -3 | 0.37 -0.04 | 14 +1.5 | 7 +0.5 | 94 = | close | + | |
| BMS 8N519 | 74.9 +5.9 | 0.37 -0.04 | 10.9 -1.6 | 6.3 -0.2 | 94 = | close | Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL | + |
| LaVoce WAF082.00 | 78 +9 | 0.37 -0.04 | 11.92 -0.58 | 6.3 -0.2 | 95 +1 | close | Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL | + |
| BMS 8S219 | 82 +13 | 0.41 = | 9.7 -2.8 | 6.3 -0.2 | 94 = | close | Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL | + |
| Faital PRO 8FE300 | 70 +1 | 0.44 +0.03 | 15.7 +3.2 | 5.52 -0.98 | 95 +1 | usable | Xmax 5.52 mm < 6.5 mm: lower excursion-limited SPL | + |
| Beyma 8"G40 | 70 +1 | 0.36 -0.05 | 17 +4.5 | 6.5 = | 95 +1 | usable | + | |
| Faital PRO 8PR210 | 65 -4 | 0.34 -0.07 | 15.7 +3.2 | 7.17 +0.67 | 94 = | usable | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 8CL51 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.