B&C 8CL51
Thiele-Small parameters
| Nominal size | 8" |
|---|---|
| Impedance | 16 Ω |
| Fs | 83 Hz |
| Qts | 0.51 |
| Qes | 0.54 |
| Qms | 8.9 |
| Vas | 9.5 L |
| Sd | 220 cm² |
| Xmax | 6 mm |
| Re | 10.1 Ω |
| Bl | 16.1 T·m |
| Mms | 26 g |
| Pe | 200 W |
| Sensitivity | 94 dB |
Alignment hint
| EBP | 154 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 10.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| BMS 8S219 | 82 -1 | 0.41 -0.1 | 9.7 +0.2 | 6.3 +0.3 | 94 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 8NDL51 | 75 -8 | 0.57 +0.06 | 10.1 +0.6 | 7 +1 | 94 = | close | 4 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 8FE400 | 100 +17 | 0.53 +0.02 | 9.4 -0.1 | 4.77 -1.23 | 96 +2 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 4.77 mm < 6 mm: lower excursion-limited SPL | + |
| Beyma 8CM V2 | 75 -8 | 0.52 +0.01 | 14.6 +5.1 | 5.7 -0.3 | 94 = | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| Faital PRO 8FE400 | 100 +17 | 0.48 -0.03 | 9.9 +0.4 | 4.87 -1.13 | 96 +2 | usable | 4 Ω vs 16 Ω: amp load changes · Xmax 4.87 mm < 6 mm: lower excursion-limited SPL | + |
| B&C 8NDL51 | 70 -13 | 0.47 -0.04 | 13.4 +3.9 | 7 +1 | 94 = | usable | + | |
| BMS 8N519 | 74.9 -8.1 | 0.37 -0.14 | 10.9 +1.4 | 6.3 +0.3 | 94 = | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 8CL51 | 69 -14 | 0.41 -0.1 | 12.5 +3 | 6.5 +0.5 | 94 = | usable | 8 Ω vs 16 Ω: amp load changes | + |
| LaVoce WAF082.00 | 78 -5 | 0.37 -0.14 | 11.92 +2.42 | 6.3 +0.3 | 95 +1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 8PR155 | 85 +2 | 0.46 -0.05 | 10.6 +1.1 | 3.57 -2.43 | 97 +3 | usable | Xmax 3.57 mm < 6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 8CL51 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.