B&C 5FG44

5" · 16 Ω · 100 W · 90 dB · datasheet ↗

Thiele-Small parameters

Nominal size	5"
Impedance	16 Ω
Fs	70 Hz
Qts	0.39
Qes	0.4
Qms	10.5
Vas	5.1 L
Sd	92 cm²
Xmax	3 mm
Re	11.1 Ω
Bl	11.6 T·m
Mms	12 g
Pe	100 W
Sensitivity	90 dB

Alignment hint

EBP	175 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 2.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 5FE120	65 -5	0.38 -0.01	5 -0.1	5.2 +2.2	88 -2	close	4 Ω vs 16 Ω: amp load changes	+
B&C 5NDL38	80 +10	0.36 -0.03	4.3 -0.8	3.5 +0.5	91 +1	usable	8 Ω vs 16 Ω: amp load changes	+
Beyma 5P200Fe	72 +2	0.33 -0.06	5.7 +0.6	5.7 +2.7	92 +2	usable	8 Ω vs 16 Ω: amp load changes	+
Faital PRO 5FE100	65 -5	0.45 +0.06	5.7 +0.6	5.25 +2.25	88 -2	usable	8 Ω vs 16 Ω: amp load changes	+
Faital PRO 5FE105	65 -5	0.45 +0.06	5.7 +0.6	5.25 +2.25	88 -2	usable	8 Ω vs 16 Ω: amp load changes	+
Sica 5 D 1 CS	79 +9	0.52 +0.13	5.5 +0.4	3 =	90 =	usable	8 Ω vs 16 Ω: amp load changes · 60 W vs 100 W: lower power handling	+
Faital PRO 5FE120	65 -5	0.48 +0.09	5.4 +0.3	5.25 +2.25	88 -2	usable	8 Ω vs 16 Ω: amp load changes	+
Faital PRO 5FE125	65 -5	0.48 +0.09	5.4 +0.3	5.25 +2.25	88 -2	usable	8 Ω vs 16 Ω: amp load changes	+
Sica 5 NR 1.5 PL	61 -9	0.35 -0.04	7.4 +2.3	3.5 +0.5	90 =	usable	8 Ω vs 16 Ω: amp load changes	+
Beyma 5"MP60/N	63 -7	0.46 +0.07	5.8 +0.7	5.5 +2.5	88 -2	usable	8 Ω vs 16 Ω: amp load changes · 50 W vs 100 W: lower power handling	+

Compare the closest 3 against the 5FG44 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.