B&C 21DS115
Thiele-Small parameters
| Nominal size | 21" |
|---|---|
| Impedance | 4 Ω |
| Fs | 32 Hz |
| Qts | 0.21 |
| Qes | 0.22 |
| Qms | 9.8 |
| Vas | 219 L |
| Sd | 1620 cm² |
| Xmax | 15 mm |
| Re | 2.1 Ω |
| Bl | 28.6 T·m |
| Mms | 409 g |
| Pe | 1700 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 21.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 21XL3000 | 32 = | 0.22 +0.01 | 223.5 +4.5 | 17.67 +2.67 | 98 -2 | close | + | |
| B&C 21DS115 | 34 +2 | 0.27 +0.06 | 204 -15 | 16.5 +1.5 | 99 -1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 21IPAL | 37 +5 | 0.21 = | 155 -64 | 22 +7 | 99 -1 | usable | 1 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 21XL3000 | 30 -2 | 0.25 +0.04 | 284.6 +65.6 | 17.67 +2.67 | 98 -2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 21SW152 | 32 = | 0.3 +0.09 | 200 -19 | 15 = | 96 -4 | usable | + | |
| 18 Sound 21NLW9001 | 32 = | 0.31 +0.1 | 244 +25 | 14 -1 | 98 -2 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| Eminence NSW6021-6 | 29 -3 | 0.31 +0.1 | 224.58 +5.58 | 21 +6 | 97 -3 | usable | 6 Ω vs 4 Ω: amp load changes | + |
| RCF LF21N551 | 35 +3 | 0.33 +0.12 | 200 -19 | 15 = | 97 -3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 21NLW9601 | 37 +5 | 0.29 +0.08 | 175 -44 | 14 -1 | 98 -2 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
| Beyma 21"LEX1600/Nd | 30 -2 | 0.29 +0.08 | 305 +86 | 14 -1 | 98 -2 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 14 mm < 15 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 21DS115 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.