B&C 18TBW100
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.39 |
| Qes | 0.41 |
| Qms | 8 |
| Vas | 175 L |
| Sd | 1210 cm² |
| Xmax | 12 mm |
| Re | 5.3 Ω |
| Bl | 26.4 T·m |
| Mms | 245 g |
| Pe | 1500 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 85 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 76.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 18SW100 | 35 = | 0.38 -0.01 | 180 +5 | 12.5 +0.5 | 97 +1 | close | + | |
| Eminence NSW4018-8 | 36 +1 | 0.38 -0.01 | 164.49 -10.51 | 15.21 +3.21 | 96.6 +0.6 | close | + | |
| Beyma 18LEX1600Fe | 34 -1 | 0.38 -0.01 | 188 +13 | 13 +1 | 97 +1 | close | + | |
| 18 Sound 18 TLW 3000 | 33 -2 | 0.407 +0.02 | 185 +10 | 11.6 -0.4 | 96.4 +0.4 | close | Xmax 11.6 mm < 12 mm: lower excursion-limited SPL | + |
| B&C 18SW100 | 36 +1 | 0.36 -0.03 | 160 -15 | 12.5 +0.5 | 96 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 18HP1030 | 35 = | 0.41 +0.02 | 185.5 +10.5 | 12.45 +0.45 | 98 +2 | close | + | |
| 18 Sound 18TLW3000 | 33 -2 | 0.41 +0.02 | 185 +10 | 12 = | 95 -1 | close | + | |
| B&C 18 TBW 100 | 32 -3 | 0.39 = | 175 = | 10.3 -1.7 | 95.2 -0.8 | close | Xmax 10.3 mm < 12 mm: lower excursion-limited SPL | + |
| B&C 18 SW 100 | 35 = | 0.375 -0.02 | 180 +5 | 9.7 -2.3 | 96.9 +0.9 | close | Xmax 9.7 mm < 12 mm: lower excursion-limited SPL | + |
| B&C 18NBX100 | 35 = | 0.37 -0.02 | 192 +17 | 10 -2 | 96 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 10 mm < 12 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18TBW100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.