B&C 18PZB100
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 38 Hz |
| Qts | 0.28 |
| Qes | 0.29 |
| Qms | 6.1 |
| Vas | 164 L |
| Sd | 1134 cm² |
| Xmax | 8 mm |
| Re | 4 Ω |
| Bl | 25 T·m |
| Mms | 190 g |
| Pe | 700 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 131 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 30.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 18XB1300 | 35.2 -2.8 | 0.287 +0.01 | 170.9 +6.9 | 8 = | 97.8 +1.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Oberton 18NXB1601 | 34.6 -3.4 | 0.286 +0.01 | 146.2 -17.8 | 8.2 +0.2 | 96.9 +0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 18NLW9600 | 34 -4 | 0.281 = | 149 -15 | 9 +1 | 97.3 +0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PD 1851/2 | 37 -1 | 0.286 +0.01 | 160.5 -3.5 | 6.7 -1.3 | 98.3 +1.8 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 6.7 mm < 8 mm: lower excursion-limited SPL | + |
| Precision Devices PD 1851/2 | 37 -1 | 0.286 +0.01 | 160.5 -3.5 | 6.7 -1.3 | 98.3 +1.8 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 6.7 mm < 8 mm: lower excursion-limited SPL | + |
| Oberton 18XB1301 | 35.7 -2.3 | 0.302 +0.02 | 172.9 +8.9 | 8.2 +0.2 | 97.9 +1.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Oberton 18XB1301DS | 35.7 -2.3 | 0.302 +0.02 | 172.9 +8.9 | 12 +4 | 97.5 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Oberton 18XB1201 | 38.05 +0.05 | 0.317 +0.04 | 159.37 -4.63 | 10.5 +2.5 | 98.5 +2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| LaVoce SAF184.50 | 35 -3 | 0.329 +0.05 | 162 -2 | 9.2 +1.2 | 96.5 = | close | 8 Ω vs 4 Ω: amp load changes | + |
| Oberton 18NXB700 | 36.24 -1.76 | 0.312 +0.03 | 155.46 -8.54 | 9 +1 | 98 +1.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 18PZB100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.