B&C 18HTX100
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 44 Hz |
| Qts | 0.323 |
| Qes | 0.34 |
| Qms | 6.3 |
| Vas | 173 L |
| Sd | 1210 cm² |
| Xmax | 5.7 mm |
| Re | 5.4 Ω |
| Bl | 26.1 T·m |
| Mms | 155.2 g |
| Pe | 800 W |
| Sensitivity | 100.1 dB |
Alignment hint
| EBP | 129 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 45.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| P.Audio C18-650EL | 42 -2 | 0.311 -0.01 | 170 -3 | 5.3 -0.4 | 99.5 -0.6 | close | Xmax 5.3 mm < 5.7 mm: lower excursion-limited SPL | + |
| Beyma 18G50 | 40 -4 | 0.321 = | 212 +39 | 6 +0.3 | 99.3 -0.8 | close | + | |
| Celestion CF1830E | 40.5 -3.5 | 0.342 +0.02 | 167.9 -5.1 | 5 -0.7 | 98.6 -1.5 | close | Xmax 5 mm < 5.7 mm: lower excursion-limited SPL | + |
| PD PDN 18SB40 | 38.5 -5.5 | 0.326 = | 201.3 +28.3 | 6 +0.3 | 98.6 -1.5 | close | 600 W vs 800 W: lower power handling | + |
| Precision Devices PDN 18SB40 | 38.5 -5.5 | 0.326 = | 201.3 +28.3 | 6 +0.3 | 98.6 -1.5 | close | 600 W vs 800 W: lower power handling | + |
| P.Audio C18-650EL v2009 | 45 +1 | 0.375 +0.05 | 158.3 -14.7 | 5.3 -0.4 | 99.4 -0.7 | close | Xmax 5.3 mm < 5.7 mm: lower excursion-limited SPL | + |
| STX W.46.1300.8.MC | 36 -8 | 0.321 = | 164 -9 | 5.5 -0.2 | 97.5 -2.6 | close | Xmax 5.5 mm < 5.7 mm: lower excursion-limited SPL | + |
| Oberton 18XB1201 | 38.05 -5.95 | 0.317 -0.01 | 159.37 -13.63 | 10.5 +4.8 | 98.5 -1.6 | close | + | |
| RCF L 18S800 | 39 -5 | 0.29 -0.03 | 206 +33 | 6.3 +0.6 | 100.2 +0.1 | close | + | |
| RCF L 18S801 | 39 -5 | 0.29 -0.03 | 206 +33 | 6.3 +0.6 | 100.2 +0.1 | close | + |
Compare the closest 3 against the 18HTX100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.