B&C 18 SW 100
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.375 |
| Qes | 0.4 |
| Qms | 5.9 |
| Vas | 180 L |
| Sd | 1210 cm² |
| Xmax | 9.7 mm |
| Re | 5 Ω |
| Bl | 25.5 T·m |
| Mms | 235.8 g |
| Pe | 1500 W |
| Sensitivity | 96.9 dB |
Alignment hint
| EBP | 88 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 70.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 18SW100 | 35 = | 0.38 +0.01 | 180 = | 12.5 +2.8 | 97 +0.1 | close | + | |
| B&C 18NBX100 | 35 = | 0.37 -0.01 | 192 +12 | 10 +0.3 | 96 -0.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 18NBX100 | 35 = | 0.38 +0.01 | 198 +18 | 10 +0.3 | 96.5 -0.4 | close | + | |
| Beyma 18LEX1600Fe | 34 -1 | 0.38 +0.01 | 188 +8 | 13 +3.3 | 97 +0.1 | close | + | |
| B&C 18TBW100 | 35 = | 0.39 +0.02 | 175 -5 | 12 +2.3 | 96 -0.9 | close | + | |
| Celestion POWER PRO X18 | 34.8 -0.2 | 0.379 = | 188.9 +8.9 | 8.6 -1.1 | 96.6 -0.3 | close | Xmax 8.6 mm < 9.7 mm: lower excursion-limited SPL | + |
| PD PD 185N01 | 35.6 +0.6 | 0.383 +0.01 | 174.5 -5.5 | 8.4 -1.3 | 97.1 +0.2 | close | 1000 W vs 1500 W: lower power handling · Xmax 8.4 mm < 9.7 mm: lower excursion-limited SPL | + |
| Precision Devices PD 185N01 | 35.6 +0.6 | 0.383 +0.01 | 174.5 -5.5 | 8.4 -1.3 | 97.1 +0.2 | close | 1000 W vs 1500 W: lower power handling · Xmax 8.4 mm < 9.7 mm: lower excursion-limited SPL | + |
| Beyma 18LEX1600/ND-8 | 35 = | 0.39 +0.02 | 205 +25 | 10.4 +0.7 | 96.8 -0.1 | close | + | |
| Fane 18XLS | 36 +1 | 0.407 +0.03 | 187 +7 | 9.3 -0.4 | 97 +0.1 | close | Xmax 9.3 mm < 9.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18 SW 100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.