B&C 18 PZB 46 vp
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 28.8 Hz |
| Qts | 0.227 |
| Qes | 0.24 |
| Qms | 4.13 |
| Vas | 346.4 L |
| Sd | 1134.1 cm² |
| Xmax | 8.1 mm |
| Re | 5.46 Ω |
| Bl | 25.6 T·m |
| Mms | 158.8 g |
| Pe | 700 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 120 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 39.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PD PD 184C01 | 30 +1.2 | 0.227 = | 337.1 -9.3 | 7.8 -0.3 | 100.2 +1.2 | close | Xmax 7.8 mm < 8.1 mm: lower excursion-limited SPL | + |
| Precision Devices PD 184C01 | 30 +1.2 | 0.227 = | 337.1 -9.3 | 7.8 -0.3 | 100.2 +1.2 | close | Xmax 7.8 mm < 8.1 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18B600 | 29 +0.2 | 0.236 +0.01 | 345 -1.4 | 7.2 -0.9 | 98.7 -0.3 | close | Xmax 7.2 mm < 8.1 mm: lower excursion-limited SPL | + |
| Radian 2218Neo | 30 +1.2 | 0.23 = | 312 -34.4 | 9 +0.9 | 99 = | close | + | |
| PD PD 182 | 28 -0.8 | 0.238 +0.01 | 391 +44.6 | 8.2 +0.1 | 98.7 -0.3 | close | + | |
| Precision Devices PD 182 | 28 -0.8 | 0.238 +0.01 | 391 +44.6 | 8.2 +0.1 | 98.7 -0.3 | close | + | |
| AE Speakers TD18H+ 8 Ohms | 29 +0.2 | 0.221 -0.01 | 390 +43.6 | 7 -1.1 | 99 = | close | Xmax 7 mm < 8.1 mm: lower excursion-limited SPL | + |
| RCF LF 18X400 | 28 -0.8 | 0.255 +0.03 | 360 +13.6 | 9 +0.9 | 98.6 -0.4 | close | + | |
| Radian 2218 NEO SUBWOOFER | 28.9 +0.1 | 0.219 -0.01 | 333 -13.4 | 6.3 -1.8 | 98.9 -0.1 | close | Xmax 6.3 mm < 8.1 mm: lower excursion-limited SPL | + |
| AE Speakers TD18H+ | 29 +0.2 | 0.221 -0.01 | 390 +43.6 | 7 -1.1 | 99.7 +0.7 | close | Xmax 7 mm < 8.1 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18 PZB 46 vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.