B&C 15TBW100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 39 Hz |
| Qts | 0.28 |
| Qes | 0.3 |
| Qms | 5.55 |
| Vas | 88 L |
| Sd | 855 cm² |
| Xmax | 12 mm |
| Re | 3.2 Ω |
| Bl | 22.56 T·m |
| Mms | 197 g |
| Pe | 1500 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 130 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15SW100 | 37 -2 | 0.28 = | 99.5 +11.5 | 12.5 +0.5 | 95 = | close | + | |
| Faital PRO 15HP1030 | 40 +1 | 0.3 +0.02 | 88.3 +0.3 | 12.45 +0.45 | 96 +1 | close | 1000 W vs 1500 W: lower power handling | + |
| Faital PRO 15XL1400 | 38 -1 | 0.3 +0.02 | 84.3 -3.7 | 12.92 +0.92 | 96 +1 | close | + | |
| B&C 15TBW100 | 39 = | 0.31 +0.03 | 96 +8 | 12 = | 96 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15XL1400 | 38 -1 | 0.33 +0.05 | 91.2 +3.2 | 12.92 +0.92 | 96 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 15DS100 | 39 = | 0.26 -0.02 | 76 -12 | 14.5 +2.5 | 96.8 +1.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15HP1060 | 40 +1 | 0.31 +0.03 | 100.3 +12.3 | 12.45 +0.45 | 97 +2 | close | 8 Ω vs 4 Ω: amp load changes · 1000 W vs 1500 W: lower power handling | + |
| B&C 15SW100 | 37 -2 | 0.31 +0.03 | 110 +22 | 12.5 +0.5 | 95 = | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15HP1030 | 40 +1 | 0.34 +0.06 | 95 +7 | 12.45 +0.45 | 96 +1 | close | 8 Ω vs 4 Ω: amp load changes · 1000 W vs 1500 W: lower power handling | + |
| B&C 15NBX100 | 37 -2 | 0.27 -0.01 | 109.6 +21.6 | 10 -2 | 95 = | close | 1000 W vs 1500 W: lower power handling · Xmax 10 mm < 12 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15TBW100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.