← all drivers

B&C 15NW76

15" · 4 Ω · 600 W · 99 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance4 Ω
Fs39 Hz
Qts0.21
Qes0.21
Qms6.41
Vas143 L
Sd855 cm²
Xmax8 mm
Re3.1 Ω
Bl20.64 T·m
Mms119 g
Pe600 W
Sensitivity99 dB

Alignment hint

EBP186 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 13.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
B&C 15FW7640 +10.21 =138 -57 -1100 +1close8 Ω vs 4 Ω: amp load changes · Xmax 7 mm < 8 mm: lower excursion-limited SPL+
Precision Devices PD15439 =0.205 -0.01149 +66.5 -1.599 =close16 Ω vs 4 Ω: amp load changes · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL+
Oberton 15PD60138.2 -0.80.228 +0.02133.31 -9.698.5 +0.598 -1close8 Ω vs 4 Ω: amp load changes+
B&C 15NW7642 +30.22 +0.01130 -138 =100.5 +1.5close8 Ω vs 4 Ω: amp load changes+
Precision Devices PD153 ER39 =0.222 +0.01160 +176.5 -1.599 =close16 Ω vs 4 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL+
PHL Audio 6321MND34 -50.207 =150 +77.2 -0.898.1 -0.9close8 Ω vs 4 Ω: amp load changes · Xmax 7.2 mm < 8 mm: lower excursion-limited SPL+
Precision Devices PD15839.85 +0.850.205 -0.01161.94 +18.946.5 -1.598.5 -0.5close8 Ω vs 4 Ω: amp load changes · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL+
P.Audio P-15N39.8 +0.80.254 +0.04144.6 +1.67.5 -0.599.2 +0.2close8 Ω vs 4 Ω: amp load changes · Xmax 7.5 mm < 8 mm: lower excursion-limited SPL+
B&C 15 PL 10037 -20.204 -0.01152.9 +9.96 -299.4 +0.4close8 Ω vs 4 Ω: amp load changes · Xmax 6 mm < 8 mm: lower excursion-limited SPL+
Beyma 15"P80Nd39 =0.21 =184 +417.5 -0.5101 +2close8 Ω vs 4 Ω: amp load changes · Xmax 7.5 mm < 8 mm: lower excursion-limited SPL+

Compare the closest 3 against the 15NW76 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.