B&C 15NBX100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 36 Hz |
| Qts | 0.29 |
| Qes | 0.31 |
| Qms | 4.2 |
| Vas | 125 L |
| Sd | 855 cm² |
| Xmax | 10 mm |
| Re | 5.1 Ω |
| Bl | 25 T·m |
| Mms | 151 g |
| Pe | 1000 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 116 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15LEX1200Nd | 36 = | 0.3 +0.01 | 127 +2 | 11 +1 | 97 = | close | + | |
| B&C 15 NBX 100 | 36 = | 0.289 = | 125 = | 7.9 -2.1 | 96.7 -0.3 | close | Xmax 7.9 mm < 10 mm: lower excursion-limited SPL | + |
| 18 Sound 15LW2400 | 40 +4 | 0.3 +0.01 | 131 +6 | 10 = | 97 = | close | + | |
| BMS 15N840 v2015 | 35.6 -0.4 | 0.303 +0.01 | 145.7 +20.7 | 9.9 -0.1 | 97.1 +0.1 | close | Xmax 9.9 mm < 10 mm: lower excursion-limited SPL | + |
| RCF LF 15X401 | 34 -2 | 0.289 = | 146 +21 | 10.3 +0.3 | 96.4 -0.6 | close | + | |
| Oberton 15XB1000 | 37.2 +1.2 | 0.283 -0.01 | 111.02 -13.98 | 9 -1 | 97 = | close | Xmax 9 mm < 10 mm: lower excursion-limited SPL | + |
| Faital PRO 15FX600 | 38 +2 | 0.27 -0.02 | 128.3 +3.3 | 11.25 +1.25 | 98 +1 | close | 700 W vs 1000 W: lower power handling | + |
| BMS 15N840V2-8 | 35.6 -0.4 | 0.268 -0.02 | 130 +5 | 8.7 -1.3 | 97.2 +0.2 | close | Xmax 8.7 mm < 10 mm: lower excursion-limited SPL | + |
| RCF LF15X401 | 34 -2 | 0.29 = | 146 +21 | 12 +2 | 96.5 -0.5 | close | + | |
| BMS 15S435 | 38 +2 | 0.28 -0.01 | 129 +4 | 8 -2 | 97 = | close | Xmax 8 mm < 10 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15NBX100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.