B&C 15NA100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.28 |
| Qes | 0.29 |
| Qms | 6.1 |
| Vas | 88 L |
| Sd | 855 cm² |
| Xmax | 10 mm |
| Re | 5.1 Ω |
| Bl | 26.3 T·m |
| Mms | 136 g |
| Pe | 800 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 162 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 15MB701 | 44.24 -2.76 | 0.268 -0.01 | 100.22 +12.22 | 9.25 -0.75 | 97.5 -0.5 | close | Xmax 9.25 mm < 10 mm: lower excursion-limited SPL | + |
| Beyma 15"P1000Fe V2 | 45 -2 | 0.3 +0.02 | 80.7 -7.3 | 8 -2 | 98 = | close | Xmax 8 mm < 10 mm: lower excursion-limited SPL | + |
| Oberton 15XL701 | 45.25 -1.75 | 0.28 = | 116.99 +28.99 | 8.75 -1.25 | 98 = | close | Xmax 8.75 mm < 10 mm: lower excursion-limited SPL | + |
| B&C 15TBW100 | 39 -8 | 0.28 = | 88 = | 12 +2 | 95 -3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 15HP1030 | 40 -7 | 0.3 +0.02 | 88.3 +0.3 | 12.45 +2.45 | 96 -2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 15 TBW 100-4 | 39 -8 | 0.285 = | 88 = | 7.8 -2.2 | 98.4 +0.4 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.8 mm < 10 mm: lower excursion-limited SPL | + |
| Sica 15 K 4 PL | 46.5 -0.5 | 0.3 +0.02 | 102.3 +14.3 | 8 -2 | 99.2 +1.2 | close | Xmax 8 mm < 10 mm: lower excursion-limited SPL | + |
| Sica 15 F 4 CP | 46.4 -0.6 | 0.27 -0.01 | 97 +9 | 7 -3 | 99.4 +1.4 | close | Xmax 7 mm < 10 mm: lower excursion-limited SPL | + |
| B&C 15 NA 100 | 47 = | 0.277 = | 88 = | 5.1 -4.9 | 98.9 +0.9 | usable | Xmax 5.1 mm < 10 mm: lower excursion-limited SPL | + |
| Faital PRO 15XL1400 | 38 -9 | 0.3 +0.02 | 84.3 -3.7 | 12.92 +2.92 | 96 -2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 15NA100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.