← all drivers

B&C 15DS100

15" · 8 Ω · 1500 W · 96.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance8 Ω
Fs39 Hz
Qts0.26
Qes0.27
Qms7.75
Vas76 L
Sd855 cm²
Xmax14.5 mm
Re4.5 Ω
Bl30.68 T·m
Mms220 g
Pe1500 W
Sensitivity96.8 dB

Alignment hint

EBP144 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 11.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
B&C 15DS10039 =0.23 -0.0373 -313 -1.596.8 =close4 Ω vs 8 Ω: amp load changes · Xmax 13 mm < 14.5 mm: lower excursion-limited SPL+
Faital PRO 15XL140038 -10.3 +0.0484.3 +8.312.92 -1.5896 -0.8close4 Ω vs 8 Ω: amp load changes · Xmax 12.92 mm < 14.5 mm: lower excursion-limited SPL+
B&C 15TBW10039 =0.28 +0.0288 +1212 -2.595 -1.8close4 Ω vs 8 Ω: amp load changes · Xmax 12 mm < 14.5 mm: lower excursion-limited SPL+
18 Sound 15NLW450035 -40.26 =111 +3514.5 =96.3 -0.5usable+
Faital PRO 15HP103040 +10.3 +0.0488.3 +12.312.45 -2.0596 -0.8usable4 Ω vs 8 Ω: amp load changes · 1000 W vs 1500 W: lower power handling · Xmax 12.45 mm < 14.5 mm: lower excursion-limited SPL+
Faital PRO 15HP106040 +10.34 +0.0876.3 +0.312.45 -2.0597 +0.2usable4 Ω vs 8 Ω: amp load changes · 1000 W vs 1500 W: lower power handling · Xmax 12.45 mm < 14.5 mm: lower excursion-limited SPL+
B&C 15SW10037 -20.28 +0.0299.5 +23.512.5 -295 -1.8usable4 Ω vs 8 Ω: amp load changes · Xmax 12.5 mm < 14.5 mm: lower excursion-limited SPL+
B&C 15TBW10039 =0.31 +0.0596 +2012 -2.596 -0.8usableXmax 12 mm < 14.5 mm: lower excursion-limited SPL+
Faital PRO 15HP106040 +10.31 +0.05100.3 +24.312.45 -2.0597 +0.2usable1000 W vs 1500 W: lower power handling · Xmax 12.45 mm < 14.5 mm: lower excursion-limited SPL+
Faital PRO 15XL140038 -10.33 +0.0791.2 +15.212.92 -1.5896 -0.8usableXmax 12.92 mm < 14.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the 15DS100 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.