B&C 15DS100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 39 Hz |
| Qts | 0.23 |
| Qes | 0.23 |
| Qms | 8.16 |
| Vas | 73 L |
| Sd | 855 cm² |
| Xmax | 13 mm |
| Re | 2.4 Ω |
| Bl | 24.3 T·m |
| Mms | 233 g |
| Pe | 1500 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 170 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15DS100 | 39 = | 0.26 +0.03 | 76 +3 | 14.5 +1.5 | 96.8 = | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15XL1400 | 38 -1 | 0.3 +0.07 | 84.3 +11.3 | 12.92 -0.08 | 96 -0.8 | usable | Xmax 12.92 mm < 13 mm: lower excursion-limited SPL | + |
| B&C 15TBW100 | 39 = | 0.28 +0.05 | 88 +15 | 12 -1 | 95 -1.8 | usable | Xmax 12 mm < 13 mm: lower excursion-limited SPL | + |
| B&C 15SW115 | 34 -5 | 0.22 -0.01 | 105 +32 | 13.5 +0.5 | 96 -0.8 | usable | + | |
| B&C 15SW115 | 35 -4 | 0.24 +0.01 | 110 +37 | 13.5 +0.5 | 96 -0.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15HP1030 | 40 +1 | 0.3 +0.07 | 88.3 +15.3 | 12.45 -0.55 | 96 -0.8 | usable | 1000 W vs 1500 W: lower power handling · Xmax 12.45 mm < 13 mm: lower excursion-limited SPL | + |
| Faital PRO 15HP1060 | 40 +1 | 0.34 +0.11 | 76.3 +3.3 | 12.45 -0.55 | 97 +0.2 | usable | 1000 W vs 1500 W: lower power handling · Xmax 12.45 mm < 13 mm: lower excursion-limited SPL | + |
| Beyma 15QLEX1600Fe | 33 -6 | 0.21 -0.02 | 102 +29 | 13 = | 96 -0.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 15NLW4500 | 35 -4 | 0.26 +0.03 | 111 +38 | 14.5 +1.5 | 96.3 -0.5 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 15SW100 | 37 -2 | 0.28 +0.05 | 99.5 +26.5 | 12.5 -0.5 | 95 -1.8 | usable | Xmax 12.5 mm < 13 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15DS100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.