← all drivers

B&C 15 TX

15" · 8 Ω · 1000 W · 101.1 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance8 Ω
Fs40 Hz
Qts0.245
Qes0.26
Qms4.29
Vas215.6 L
Sd855 cm²
Xmax9 mm
Re5.2 Ω
Bl19.4 T·m
Mms75.2 g
Pe1000 W
Sensitivity101.1 dB

Alignment hint

EBP154 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 29.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
RCF L 15/554K35 -50.243 =227 +11.48 -198.7 -2.4close600 W vs 1000 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL+
Oxygen JET 2 1533 -70.245 =178 -37.611 +2101.3 +0.2close4 Ω vs 8 Ω: amp load changes+
18 Sound 15ND94039 -10.26 +0.02170 -45.69.5 +0.599 -2.1close4 Ω vs 8 Ω: amp load changes · 600 W vs 1000 W: lower power handling+
PD 153ERC00238 -20.249 =263 +47.46.8 -2.2100.9 -0.2close550 W vs 1000 W: lower power handling · Xmax 6.8 mm < 9 mm: lower excursion-limited SPL+
Precision Devices 153ERC00238 -20.249 =263 +47.46.8 -2.2100.9 -0.2close550 W vs 1000 W: lower power handling · Xmax 6.8 mm < 9 mm: lower excursion-limited SPL+
Beyma 15P80/ND35 -50.214 -0.03217 +1.47.9 -1.1100.1 -1usableXmax 7.9 mm < 9 mm: lower excursion-limited SPL+
Faital PRO 15FH51035 -50.26 +0.02191.8 -23.89.25 +0.2598 -3.1usable500 W vs 1000 W: lower power handling+
MC Kenzie C15.400BS40 =0.219 -0.03215 -0.65.4 -3.6101 -0.1usable400 W vs 1000 W: lower power handling · Xmax 5.4 mm < 9 mm: lower excursion-limited SPL+
Radian 5215B oem242 +20.247 =197 -18.65.5 -3.5100.6 -0.5usable625 W vs 1000 W: lower power handling · Xmax 5.5 mm < 9 mm: lower excursion-limited SPL+
Radian 5215B oem342 +20.247 =197 -18.65.5 -3.5100.6 -0.5usable625 W vs 1000 W: lower power handling · Xmax 5.5 mm < 9 mm: lower excursion-limited SPL+

Compare the closest 3 against the 15 TX →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.