B&C 15 SW 115-4
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34 Hz |
| Qts | 0.221 |
| Qes | 0.23 |
| Qms | 5.8 |
| Vas | 105 L |
| Sd | 855 cm² |
| Xmax | 8.4 mm |
| Re | 3.2 Ω |
| Bl | 25.2 T·m |
| Mms | 213.9 g |
| Pe | 1700 W |
| Sensitivity | 98.5 dB |
Alignment hint
| EBP | 148 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15SW115 | 34 = | 0.22 = | 105 = | 13.5 +5.1 | 96 -2.5 | close | + | |
| B&C 15 SW 115 | 35 +1 | 0.237 +0.02 | 110 +5 | 8.8 +0.4 | 96.6 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 15QLEX1600Fe | 33 -1 | 0.21 -0.01 | 102 -3 | 13 +4.6 | 96 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 15NW100 | 33 -1 | 0.22 = | 139 +34 | 9 +0.6 | 97 -1.5 | close | 8 Ω vs 4 Ω: amp load changes · 1000 W vs 1700 W: lower power handling | + |
| B&C 15SW115 | 35 +1 | 0.24 +0.02 | 110 +5 | 13.5 +5.1 | 96 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 15NW100 | 34 = | 0.23 +0.01 | 126.1 +21.1 | 9 +0.6 | 95 -3.5 | close | 1000 W vs 1700 W: lower power handling | + |
| Oberton 15PD601 | 38.2 +4.2 | 0.228 +0.01 | 133.31 +28.31 | 8.5 +0.1 | 98 -0.5 | close | 8 Ω vs 4 Ω: amp load changes · 600 W vs 1700 W: lower power handling | + |
| B&C 15 NW 100 | 33 -1 | 0.218 = | 139 +34 | 7.4 -1 | 97.3 -1.2 | close | 8 Ω vs 4 Ω: amp load changes · 1000 W vs 1700 W: lower power handling · Xmax 7.4 mm < 8.4 mm: lower excursion-limited SPL | + |
| Faital PRO 15XL2400 | 32 -2 | 0.21 -0.01 | 113.9 +8.9 | 17.67 +9.27 | 96 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| RCF LF15N401 | 34 = | 0.22 = | 160 +55 | 9 +0.6 | 97 -1.5 | usable | 8 Ω vs 4 Ω: amp load changes · 900 W vs 1700 W: lower power handling | + |
Compare the closest 3 against the 15 SW 115-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.