B&C 15 PS 100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.309 |
| Qes | 0.33 |
| Qms | 4.8 |
| Vas | 150.1 L |
| Sd | 855 cm² |
| Xmax | 7.8 mm |
| Re | 5.3 Ω |
| Bl | 23 T·m |
| Mms | 158.8 g |
| Pe | 700 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 35.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15NLW9500 | 34 +1 | 0.29 -0.02 | 147.5 -2.6 | 9 +1.2 | 96 +0.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 15P1000 | 35 +2 | 0.293 -0.02 | 146 -4.1 | 8.7 +0.9 | 96.3 +0.4 | close | + | |
| B&C 15 PS 100 (prodance) | 34.8 +1.8 | 0.339 +0.03 | 148.7 -1.4 | 8 +0.2 | 96.2 +0.3 | close | + | |
| 18 Sound 15NLW9500 | 35 +2 | 0.32 +0.01 | 163 +12.9 | 9 +1.2 | 96 +0.1 | close | + | |
| Fane COLOSSUS 15XS | 36.3 +3.3 | 0.307 = | 149.7 -0.4 | 9.1 +1.3 | 97.3 +1.4 | close | + | |
| Fane COLOSSUS PRIME 15XS | 36.3 +3.3 | 0.307 = | 149.7 -0.4 | 9.1 +1.3 | 97.3 +1.4 | close | + | |
| RCF LF 15X401 | 34 +1 | 0.289 -0.02 | 146 -4.1 | 10.3 +2.5 | 96.4 +0.5 | close | + | |
| BMS 15N840 v2015 | 35.6 +2.6 | 0.303 -0.01 | 145.7 -4.4 | 9.9 +2.1 | 97.1 +1.2 | close | + | |
| Beyma 15G40 | 37 +4 | 0.301 -0.01 | 149 -1.1 | 7.7 -0.1 | 97.2 +1.3 | close | Xmax 7.7 mm < 7.8 mm: lower excursion-limited SPL | + |
| RCF LF15X401 | 34 +1 | 0.29 -0.02 | 146 -4.1 | 12 +4.2 | 96.5 +0.6 | close | + |
Compare the closest 3 against the 15 PS 100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.