B&C 15 PL 100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37 Hz |
| Qts | 0.204 |
| Qes | 0.21 |
| Qms | 6.6 |
| Vas | 152.9 L |
| Sd | 855 cm² |
| Xmax | 6 mm |
| Re | 5.3 Ω |
| Bl | 27 T·m |
| Mms | 124 g |
| Pe | 700 W |
| Sensitivity | 99.4 dB |
Alignment hint
| EBP | 176 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD154 | 39 +2 | 0.205 = | 149 -3.9 | 6.5 +0.5 | 99 -0.4 | close | 16 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Precision Devices PD158 | 39.85 +2.85 | 0.205 = | 161.94 +9.04 | 6.5 +0.5 | 98.5 -0.9 | close | + | |
| B&C 15NW76 | 39 +2 | 0.21 +0.01 | 143 -9.9 | 8 +2 | 99 -0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| PHL Audio 6321MND | 34 -3 | 0.207 = | 150 -2.9 | 7.2 +1.2 | 98.1 -1.3 | close | + | |
| Precision Devices PD153 ER | 39 +2 | 0.222 +0.02 | 160 +7.1 | 6.5 +0.5 | 99 -0.4 | close | 16 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling | + |
| B&C 15FW76 | 40 +3 | 0.21 +0.01 | 138 -14.9 | 7 +1 | 100 +0.6 | close | 500 W vs 700 W: lower power handling | + |
| PD PD 154 | 39 +2 | 0.206 = | 149 -3.9 | 4.6 -1.4 | 99.2 -0.2 | close | 500 W vs 700 W: lower power handling · Xmax 4.6 mm < 6 mm: lower excursion-limited SPL | + |
| Precision Devices PD 154 | 39 +2 | 0.206 = | 149 -3.9 | 4.6 -1.4 | 99.2 -0.2 | close | 500 W vs 700 W: lower power handling · Xmax 4.6 mm < 6 mm: lower excursion-limited SPL | + |
| Oberton 15XL601 | 40.9 +3.9 | 0.216 +0.01 | 150.32 -2.58 | 5.25 -0.75 | 100 +0.6 | close | Xmax 5.25 mm < 6 mm: lower excursion-limited SPL | + |
| DAS Audio 15GN | 36 -1 | 0.213 +0.01 | 197 +44.1 | 6 = | 99.2 -0.2 | close | + |
Compare the closest 3 against the 15 PL 100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.