B&C 15 NDL 88
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 45 Hz |
| Qts | 0.34 |
| Qes | 0.36 |
| Qms | 6.1 |
| Vas | 126 L |
| Sd | 855 cm² |
| Xmax | 6.6 mm |
| Re | 5 Ω |
| Bl | 20 T·m |
| Mms | 101.7 g |
| Pe | 700 W |
| Sensitivity | 99.1 dB |
Alignment hint
| EBP | 125 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 37.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15NDL88 | 45 = | 0.34 = | 126 = | 8 +1.4 | 99 -0.1 | close | + | |
| Beyma 15MCB700 | 44 -1 | 0.34 = | 148 +22 | 7 +0.4 | 99 -0.1 | close | + | |
| MC Kenzie C15.500BS | 45 = | 0.35 +0.01 | 145 +19 | 6.5 -0.1 | 98.8 -0.3 | close | 500 W vs 700 W: lower power handling · Xmax 6.5 mm < 6.6 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF v1 | 46 +1 | 0.372 +0.03 | 127.5 +1.5 | 6.4 -0.2 | 98.6 -0.5 | close | Xmax 6.4 mm < 6.6 mm: lower excursion-limited SPL | + |
| Oberton 15MB35 | 47.7 +2.7 | 0.336 = | 115.1 -10.9 | 6.75 +0.15 | 100 +0.9 | close | + | |
| Sica 15 PF 3 | 45 = | 0.31 -0.03 | 117.6 -8.4 | 8 +1.4 | 99.1 = | close | + | |
| B&C 15CL76 | 42 -3 | 0.33 -0.01 | 135 +9 | 7 +0.4 | 98.5 -0.6 | close | 400 W vs 700 W: lower power handling | + |
| 18 Sound 15W1301 | 48 +3 | 0.355 +0.01 | 123 -3 | 6 -0.6 | 99.3 +0.2 | close | Xmax 6 mm < 6.6 mm: lower excursion-limited SPL | + |
| Beyma 15G450 | 45 = | 0.32 -0.02 | 115 -11 | 6.2 -0.4 | 98.5 -0.6 | close | Xmax 6.2 mm < 6.6 mm: lower excursion-limited SPL | + |
| Beyma 15G450/N | 45 = | 0.32 -0.02 | 115 -11 | 6.2 -0.4 | 98.5 -0.6 | close | Xmax 6.2 mm < 6.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15 NDL 88 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.