B&C 15 CXN 88
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40 Hz |
| Qts | 0.254 |
| Qes | 0.26 |
| Qms | 10.3 |
| Vas | 178 L |
| Sd | 855 cm² |
| Xmax | 6 mm |
| Re | 5 Ω |
| Bl | 21 T·m |
| Mms | 91.1 g |
| Pe | 500 W |
| Sensitivity | 100.4 dB |
Alignment hint
| EBP | 154 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PHL Audio 5050 | 38 -2 | 0.254 = | 180 +2 | 5.9 -0.1 | 99.2 -1.2 | close | Xmax 5.9 mm < 6 mm: lower excursion-limited SPL | + |
| PHL Audio 5140 | 38 -2 | 0.245 -0.01 | 180 +2 | 5.7 -0.3 | 100.6 +0.2 | close | Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| PHL Audio 5030 | 40 = | 0.236 -0.02 | 180 +2 | 5.4 -0.6 | 100.2 -0.2 | close | Xmax 5.4 mm < 6 mm: lower excursion-limited SPL | + |
| Sica 15 K 3 PL | 40 = | 0.27 +0.02 | 166.1 -11.9 | 6.5 +0.5 | 99.7 -0.7 | close | + | |
| PD PD 158 | 39.9 -0.1 | 0.241 -0.01 | 161.9 -16.1 | 5.9 -0.1 | 99.4 -1 | close | Xmax 5.9 mm < 6 mm: lower excursion-limited SPL | + |
| Precision Devices PD 158 | 39.9 -0.1 | 0.241 -0.01 | 161.9 -16.1 | 5.9 -0.1 | 99.4 -1 | close | Xmax 5.9 mm < 6 mm: lower excursion-limited SPL | + |
| PHL Audio 5200 | 38 -2 | 0.272 +0.02 | 180 +2 | 6 = | 101.6 +1.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 15NLW9300 v2015 | 39 -1 | 0.263 +0.01 | 170 -8 | 7.2 +1.2 | 98.9 -1.5 | close | + | |
| PD PD 153 C01 | 39 -1 | 0.265 +0.01 | 195 +17 | 5.5 -0.5 | 100.2 -0.2 | close | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
| Precision Devices PD 153 C01 | 39 -1 | 0.265 +0.01 | 195 +17 | 5.5 -0.5 | 100.2 -0.2 | close | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15 CXN 88 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.