B&C 12NDL88
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 50 Hz |
| Qts | 0.37 |
| Qes | 0.38 |
| Qms | 8.3 |
| Vas | 55 L |
| Sd | 522 cm² |
| Xmax | 8 mm |
| Re | 11.1 Ω |
| Bl | 25.3 T·m |
| Mms | 70 g |
| Pe | 700 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 132 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12PLB100 | 50 = | 0.37 = | 47 -8 | 9 +1 | 97 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 12NLW9300 | 47 -3 | 0.42 +0.05 | 56 +1 | 8 = | 97 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12MCS500 | 57 +7 | 0.36 -0.01 | 57 +2 | 8 = | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| B&C 12 NDL 88 16 Ohms | 50 = | 0.363 -0.01 | 55 = | 7.1 -0.9 | 93.1 -3.9 | close | Xmax 7.1 mm < 8 mm: lower excursion-limited SPL | + |
| 18 Sound 12NLW9300 v2022 | 47 -3 | 0.416 +0.05 | 56 +1 | 8 = | 95.4 -1.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 12HP1010 | 45 -5 | 0.34 -0.03 | 56.5 +1.5 | 9.25 +1.25 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12"MC500 | 57 +7 | 0.34 -0.03 | 57 +2 | 8 = | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Beyma 12"LX60V2 | 49 -1 | 0.38 +0.01 | 43 -12 | 9 +1 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 112Nd/W | 48 -2 | 0.415 +0.04 | 55 = | 7.4 -0.6 | 95 -2 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 7.4 mm < 8 mm: lower excursion-limited SPL | + |
| Oberton 12NMB35 | 54.42 +4.42 | 0.36 -0.01 | 54.29 -0.71 | 6.75 -1.25 | 99 +2 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 6.75 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 12NDL88 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.