B&C 12BG76
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 44 Hz |
| Qts | 0.41 |
| Qes | 0.44 |
| Qms | 5.9 |
| Vas | 32 L |
| Sd | 522 cm² |
| Xmax | 9.5 mm |
| Re | 5.4 Ω |
| Bl | 22.7 T·m |
| Mms | 148 g |
| Pe | 500 W |
| Sensitivity | 92 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Ciare 12.00 SW | 43.61 -0.39 | 0.38 -0.03 | 32 = | 11.5 +2 | 90.1 -1.9 | close | + | |
| Faital PRO 12RS1066 | 45 +1 | 0.44 +0.03 | 28.4 -3.6 | 12.45 +2.95 | 92 = | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 12 BG 76 | 44 = | 0.409 = | 32 = | 5.1 -4.4 | 91.6 -0.4 | close | Xmax 5.1 mm < 9.5 mm: lower excursion-limited SPL | + |
| Faital PRO 12RS1066 | 42 -2 | 0.33 -0.08 | 31.5 -0.5 | 12.45 +2.95 | 93 +1 | close | + | |
| Faital PRO 12XL1200 | 50 +6 | 0.42 +0.01 | 25 -7 | 12.45 +2.95 | 93 +1 | usable | + | |
| MTX Audio TX812 | 35 -9 | 0.422 +0.01 | 24.6 -7.4 | 10 +0.5 | 91.6 -0.4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| DC Audio LV4 D2 | 35.9 -8.1 | 0.5 +0.09 | 30.6 -1.4 | 11 +1.5 | 92.2 +0.2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 12LX60V2 | 49 +5 | 0.38 -0.03 | 43 +11 | 9 -0.5 | 92.9 +0.9 | usable | 350 W vs 500 W: lower power handling · Xmax 9 mm < 9.5 mm: lower excursion-limited SPL | + |
| Faital PRO 12RS550 | 42 -2 | 0.37 -0.04 | 45.4 +13.4 | 9.25 -0.25 | 93 +1 | usable | Xmax 9.25 mm < 9.5 mm: lower excursion-limited SPL | + |
| FI Audio Q12 DUAL 2 | 33.9 -10.1 | 0.371 -0.04 | 28.3 -3.7 | 10.6 +1.1 | 91.1 -0.9 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 12BG76 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.