B&C 12 PH 32 (prodance)
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 56.8 Hz |
| Qts | 0.333 |
| Qes | 0.35 |
| Qms | 6.86 |
| Vas | 92.7 L |
| Sd | 530.9 cm² |
| Xmax | 3 mm |
| Re | 5.7 Ω |
| Bl | 13.9 T·m |
| Mms | 33.5 g |
| Pe | 250 W |
| Sensitivity | 100.3 dB |
Alignment hint
| EBP | 162 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion K12-100 | 51 -5.8 | 0.325 -0.01 | 100 +7.3 | 3.2 +0.2 | 99.5 -0.8 | close | 100 W vs 250 W: lower power handling | + |
| Supravox 285 GMF vp Melaudia | 59.3 +2.5 | 0.375 +0.04 | 97.4 +4.7 | 3.3 +0.3 | 100.1 -0.2 | close | 70 W vs 250 W: lower power handling | + |
| B&C 12 HPL 64-4 v2015 | 50 -6.8 | 0.321 -0.01 | 92.3 -0.4 | 4 +1 | 101 +0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Radian 5312 vp | 57.9 +1.1 | 0.36 +0.03 | 101.3 +8.6 | 5.5 +2.5 | 100.4 +0.1 | close | + | |
| B&C 12 CXT | 49 -7.8 | 0.321 -0.01 | 91 -1.7 | 3 = | 98.6 -1.7 | close | + | |
| B&C 12 PH 32 v2013 | 50.5 -6.3 | 0.334 = | 107 +14.3 | 3 = | 99.1 -1.2 | close | + | |
| Benett 12.180 X/N | 49 -7.8 | 0.325 -0.01 | 100.9 +8.2 | 3 = | 98.5 -1.8 | close | 100 W vs 250 W: lower power handling | + |
| B&C 12 HPL 64 | 52 -4.8 | 0.316 -0.02 | 85 -7.7 | 4 +1 | 98.7 -1.6 | close | + | |
| Faital PRO 12PR300 | 50 -6.8 | 0.36 +0.03 | 92.6 -0.1 | 4.92 +1.92 | 99 -1.3 | close | + | |
| Ciare PW320ND | 49 -7.8 | 0.345 +0.01 | 87 -5.7 | 3 = | 97.8 -2.5 | close | 150 W vs 250 W: lower power handling | + |
Compare the closest 3 against the 12 PH 32 (prodance) →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.